Glass Laminating Guide by Luc Moeyersons

Date: 1 June 2023
  • By Luc Moeyersons

Date: 1 June 2023

In his blogs, Luc Moeyersons covered various subjects related to laminated glass, whether it is automotive, architectural, or photovoltaic.

Author: Luc Moeyersons

Thanks to Francis Serruys for proof reading.

This information corresponds to our current knowledge on this subject. It is offered solely to provide possible suggestions for your own experimentations. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our advice for your particular purposes.

This information may be subject to revision as new knowledge and experience become available. Since we cannot anticipate all variations in actual end-use conditions, LAMI-Solutions makes no warranties and assumes no liability in connection with any use of this information.

Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent right.

We covered in some 19 blogs, lots of subjects related to laminated glass, being it automotive or architectural (or Photovoltaic).

Courtesy of Bovone
Courtesy of Bovone


Architectural laminated glass – PVB preparation – Chemistry/Physics/adhesion to glass


Courtesy My Beckman
Courtesy My Beckman


Courtesy of Benteler
Courtesy of Benteler


Architectural laminated glass – Autoclave


Courtesy of HOAF
Courtesy of HOAF


Architectural laminated glass – Most common laminating defects and origin.


Courtesy of Teknisolar
Courtesy of Teknisolar


Courtesy of IP-FAB – schematic representation of adhesion mechanism of EVA interlayer foils
Courtesy of IP-FAB – schematic representation of adhesion mechanism of EVA interlayer foils


Courtesy of Sibsteklo
Courtesy of Sibsteklo


Defects on laminated glass during installation


Courtesy of HB Fuller - Kömmerling
Courtesy of HB Fuller - Kömmerling


Automotive laminated glass – history


Automotive laminated glass – Preparation of glass


PVB preparation


Automotive laminated glass – Assembly



Automotive laminated glass - Autoclaving and Inspection

(in collaboration with Juan Pablo Suarez – AGP)



I could continue to write articles but they would be very specialised/detailed.

To keep them interesting, I would like to ask if you have suggestions for further articles (related to glass lamination).

Please feel free to suggest subjects , I will try (or find(co-)author) to write a blog about that specific subject (if permitted by the industry).

Thanks for your cooperation.

Luc Moeyersons

600450 Glass Laminating Guide by Luc Moeyersons

Others also read

The objective of this study is to understand the response of laminated glass under high-rate bending in the laboratory at rates representative of blast loading.
The redeveloped CME Center lobby is defined by a striking, wavelike 24’ tall glass façade.
The ability to predict interlayer and glass temperatures in the glass lamination process is the key factor for success.
Glass timber panels (GTP) combine the visual effect of noble and high-quality wood materials at the same time meet-ing the hygiene requirements for the health and welfare sector. This paper describes the fabrication requirements and techniques of GTP.
In this contribution, a long-lasting natural weather testing of several glass types, mostly LSG with different interlayer materials, and the effect of the different color patterns of paper and textile specimens are presented.
This paper delves into the potential of two UV-curing acrylate adhesives, scrutinizing their material behavior through meticulous uniaxial tension tests and dynamic mechanical-thermal analysis.


Ottergemsesteenweg 707-Zuid
9000 Ghent

İçmeler Mah. D-100 Karayolu Cad. No:44A,
34947 Tuzla,/İstanbul

Pol. Ind. Penapurreira Parcela C4-B,
15320 As Pontes de García Rodríguez A Coruña

Via per Monastier, 4
31056 Vallio di Roncade TV

No. 160 Yichuan Rd.,
Jiaonan Shi
Qingdao Shi
Shandong Sheng, 266000

Add new comment