Glastory: Important service factors in glass lamination

Date: 16 December 2020
Copyright:
  • Riku Färm | Glaston

Date: 16 December 2020

Some practical tips on how you can well maintain your laminating line and extend its longevity.

Did you know that the laminating line maintenance cost can vary greatly depending on your specific technology? For example, furnaces with infrared heating technology require much more maintenance and involve higher maintenance costs.

Regular maintenance can keep your line running smoothly year after year. However, there are other factors that can help you save thousands in maintenance costs.

Heating elements can cause the biggest cost

It goes without saying that old and outdated equipment tends to break down more frequently, forcing you to go to the expense of urgent maintenance at inopportune times. But even newer equipment has pitfalls.

As long as maintenance is performed according to instructions, basic maintenance of conveyors, washing machine, lifters and other parts of the laminating line is actually a relatively small cost. Neglecting recommended maintenance can cause increased maintenance costs as well unexpected production breaks due to issues with the line.

Often the largest cost comes from having to replace burned-out heating elements frequently. In fact, this often turns into a rather massive annual cost, which should have been considered upfront. And of course, on top of actual heater costs you need to consider downtime of the line, labor as well as possible quality costs caused by broken heaters.

It’s good this mainly concerns laminating furnaces with infrared heating technology. The lifetime of the infrared lamps is still rather short for this kind of application.

Alternatively, a convection furnace offers a much more robust and low-maintenance solution. Its heating elements can last even decades and are also much cheaper compared to infrared lamps. So, convection furnaces require less maintenance and provide higher uptime in day-to-day operations.

Laminating line’s serviceability factor

It’s also important to consider the line’s serviceability factor. Complex component configuration and furnace design call for more time-consuming – and cost-intensive – activities associated with future maintenance needs.

Ideally, the line should be designed to simplify the maintenance workflow for those responsible for downstream repair and keep spare parts requirements to a minimum.

If you want to check whether your current laminating line is operating efficiently in terms of maintenance, below are some questions to ask yourself. Or if you are thinking of acquiring a line, these are worth asking from your potential suppliers.

  • What are the most critical components that require maintenance?
  • How easy is it to get the required spare parts?
  • What is the lead time on spare parts?
  • How simple is its serviceability?
  • What is the expected uptime of the line?
  • Do you have any service agreement available?
  • What does your maintenance program look like?
  • What is your experience with the service response time?

Treating your equipment with care

Usually the laminating line in a glass processing facility is an extremely important part of the business. It is also one of the major investments and you surely want it to be around for a long time. While the supplier of the line plays a very important part in providing robust and reliable solutions, it also comes down directly to how you treat the line throughout its lifetime.

In conclusion, here are some practical tips on how you can well maintain your laminating line and extend its longevity.

  1. Perform a visual inspection on the line at regular intervals according to the manufacturer’s instructions. Small, routine checks are usually enough to catch impending issues.
  2. Pay attention to the quality of your output products – malfunctions within the line can cause quality changes.
  3. Implement maintenance as soon as the fault is reported. Waiting can cause more severe issues.
  4. Train your team. Your entire team should have an understanding of the proper care of your line.
  5. Consider investing in a service agreement. An effective service agreement will allow you to pass all the cares over to the experienced professionals.

If you are interested in knowing more about other specifics of the glass lamination business, be sure to check out the Laminating Line Buyer’s Guide.

600450 Glastory: Important service factors in glass lamination glassonweb.com

Others also read

An Initial Study Towards Optimized Structural Assessment of Glass Components
The latest Glastory post is dealing with the trends in automotive display glass processing.
In this blog post, we look at trends in the sunroof and windshield business today and how glass processors can prepare for them.
A clean, safe and sustainable source of energy, solar continues to power the world at a faster pace than ever before.
For years and years research, development and discussions have been made on the safety of glass structures.
Building code requirements for wind-borne debris protection have been in existence since the mid- 1990s, and as a result, many glazing systems have been tested and certified to these performance requirements.
For nearly 50 years, glass has been used as structural elements in glass fin applications. These applications include interior and exterior projects, supporting facades, canopies, storefronts, curtain walls and skylights.
Anisotropy is the term used in the façade industry to describe the manifestation of patterns and colourful areas in heat-treated glass under certain light and viewing conditions.
Originally developed for glazing in hurricane zones, SentryGlas® ionoplast interlayers are significantly stiffer than standard PVBs such as Butacite®.
Post breakage strength of glass is still an unknown area as analytical models for this are inconclusive so far and thus destructive testing is the only reliable solution.
Latest Glastory blog by Jukka Immonen is dealing with the 5 promises of convection technology in windshield bending.
In this work, a combined Voronoi and finite-discrete element method (FDEM) approach for reconstructing the post-fracture model of laminated glass (LG) was proposed.

FROM INDUSTRY

Ctra. Estación Km. 15.8
44415 Rubielos de Mora Teruel
Spain

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

Via per Monastier, 4
31056 Vallio di Roncade TV
Italy

Pol. Ind. Penapurreira Parcela C4-B,
15320 As Pontes de García Rodríguez A Coruña
Spain

No. 160 Yichuan Rd.,
Jiaonan Shi
Qingdao Shi
Shandong Sheng, 266000
China

ARTICLES RELATED PRODUCTS

Michael Mercury, LTD
Hornos Industriales Pujol
Glaston Corporation
Eastman Machine Company
Hornos Industriales Pujol
Hornos Industriales Pujol
Guardian Europe
Kuraray Europe GmbH
LISEC Austria GmbH
Kuraray Europe GmbH
Guardian Europe
Glaston Corporation
Kuraray Europe GmbH
Michael Mercury, LTD

Add new comment