DuPont™ SentryGlas® Helps Set the Scene in Stunning Natural Surroundings - Glacier Skywalk, Canadian Rockies

Date: 30 May 2014
Copyright:
  • www.sentryglas.com
DuPont™ SentryGlas® Helps Set the Scene in Stunning Natural Surroundings - Glacier Skywalk, Canadian Rockies
Photo source
DuPont
The Glacier Skywalk, a 35 m (115 ft) cantilevered glassfloored observation platform some 280 m (918 ft) above the Sunwapta Valley in the Canadian Rockies, gives its visitors a unique bird's eye view of the awe-inspiring power and beauty of Mother Nature at her absolute finest.

The initial design concept called upon a structure that drew inspiration from the surrounding environment and then extending and integrating it in a way that did not detract from the beauty of the site.

The Glacier Skywalk, a 35 m (115 ft) cantilevered glassfloored observation platform some 280 m (918 ft) above the Sunwapta Valley in the Canadian Rockies, gives its visitors a unique bird's eye view of the awe-inspiring power and beauty of Mother Nature at her absolute finest.

Minutes from the Columbia Icefield Glacier Discovery Centre on the Icefields Parkway, this breathtaking structure, jutting out from the cliff face, is a superb example of DuPont™ SentryGlas® ionoplast interlayers in action; combining sympathetic aesthetics with vital strength, environmental ruggedness and longevity.

The SentryGlas® used in the glass-floored platform enhances the viewing experience for the visitor, enriching their connection with the surrounding environment.

The initial design concept called upon a structure that drew inspiration from the surrounding environment and then extending and integrating it in a way that did not detract from the beauty of the site. Brewster Travel Canada worked with Sturgess Architecture and structural engineers Read Jones Christofferson Engineering to conceptualise the design.

The construction team, led by PCL Construction used German specialist glazing subcontractor Josef Gartner GmbH to supply and install the glass, who in turn used BGT Bischoff Glastechnik AG, also from Germany, to actually laminate the panels.

According to John Kooymans, Principal at Read Jones Christoffersen Ltd.: "Laminated glazing panels were specified for this project because of redundancy and the code requirements for floor glass. SentryGlas® offers better post-breakage behaviour and performs better in exterior climate conditions, it is also stronger and stiffer than other laminates on the market. We try to use it for all critical postbreakage conditions and overhead glass. It allows for less or thinner lites, which can be more complementary to the surrounding structures."

"We design the glass make up to ensure structural and post breakage behaviours meet or exceed the needs for the codes and project specifics, " Kooymans adds. "We allow the glazing company who wins the bid to tweak the design if they wish, based on supply and fabrication preferences, but the original design protects the details and the costs."

The breathtaking Glacier Skywalk, jutting out from the cliff face, is a superb example of DuPont™ SentryGlas® ionoplast interlayers in action.

Stefan Zimmermann, Senior Manager Operations at Josef Gartner GmbH, the specialist glazing subcontractor, who also designed, fabricated and installed the steel structure and the glazing for the Skywalk, elaborates: "We are doing lot of specialised glazing work in North America, where we work very closely with general contractors. As well as manufacturing and installation we also undertake a lot of design work.

For this project, we did the structural calculations for the glass and the glazing details. We took the generic drawings and then fine tuned them to suit the install, taking into account the capabilities of the glass panels. With our capabilities we can examine projects in a much broader fashion, not just from an installation perspective. We are certainly seeing more and more projects involving SentryGlas®, many of which use it in a way that really exploit its capabilities."

Klaus Wittmann, from BGT Bischoff Glastechnik AG, the laminator expands on the make up of the glass panels: "We constructed a three-ply laminate for the floor of the Skywalk, which comprised three 10 mm (0.39 in) glass panels sandwiching two 1.52 mm (60 mil) SentryGlas® ionoplast interlayers.

A 6 mm (0.23 in) cover sheet was also applied for easy maintenance, which exhibits small acidetched dots for grip without hindering the view through the panels. This removable top sheet is attached to the main laminated panels by means of a clear foil. The 200 m2 (2,152 ft2) balustrade also deployed a 1.52 mm (60 mil) SentryGlas® ionoplast interlayer between two 10 mm (0.39 in) glass panels.

"The advantage of SentryGlas," Wittmann elaborates, "is that you can use thinner glass with comparable results and same aesthetic. From an installer's point of view, this is incredibly advantageous, as the lower weight helps with handling and construction. The thinner laminates are also far better for colour, which in this instance and setting is very important. We have a good ongoing relationship with DuPont, working on numerous projects together using SentryGlas®."

According to David McKenna, Interim President at Brewster Travel Canada: "The vision behind the Glacier Skywalk was to create a world-class, fully accessible experience that engages visitors to learn about the glaciology, geology and unique ecosystem of the Columbia Icefield region. The materials used in the project were specially selected to mirror, rather than distract from, the natural environment. The SentryGlas® used in the glassfloored platform enhances the viewing experience for the visitor, enriching their connection with the surrounding environment.”

 

Lighter façade panels enable more subtle supporting structures

For decades, interlayers made of polyvinyl butyral (PVB) have been the industry standard when producing laminated safety glass. Architects are well aware of the possibilities and limitations of such glass when used extensively in façade engineering, for roofing and window panels. In contrast, SentryGlas® enables an entirely new approach because the interlayer is over 100 times stiffer and five times stronger than PVB.

As a consequence, there is an almost perfect transmission of load between two laminated sheets of glass, even at high temperatures, leading to the excellent flexural behavior of the glass when under load – also under direct sunlight in high summer. Accordingly, laminates with SentryGlas® show less than half the rate of deflection when compared to laminates with PVB, when under the same load, and thus almost the same behavior as monolithic glass of the same thickness.

 

Main benefits of SentryGlas®:

  • Safety:
    In the event of breakage, glass fragments remain firmly bonded to the interlayer, reducing the chance for injury.
  • Security:
    SentryGlas® can be used in glazing that withstands bullets, hurricane-force winds and even bomb blasts.
  • Durability:
    SentryGlas® is extremely durable and resistant to clouding, even after years of exposure.
  • Design Versatility:
    SentryGlas® can be used in glass manufactured flat or curved, including annealed, toughened, heat-strengthened, spandrel, wired, patterned and color tinted glass.
  • UV control:
    SentryGlas® is available with our without UV transmittance

 

REGIONAL CONTACT CENTERS FOR DUPONT™ SENTRYGLAS®

DuPont Glass laminating Solutions
Wilmington, Delaware u.S.a.
telephone +1 302 774 1161
toll-free (uSa) 800 438 7225
Fax +1 302 892 7390

DuPont do Brasil, S.a.
Barueri, Sao Paulo Brasil
telephone +55 11 4166 8542
Fax +55 11 4166 8720

DuPont China holding Co., ltd.
Pudong new District, Shanghai
telephone +86 21 3862 2888
Fax +86 21 3862 2889

DuPont de nemours int’l. S.a.
Geneva, Switzerland
telephone +41 22 717 51 11
Fax +41 22 717 55 00

www.sentryglas.com

600450 DuPont™ SentryGlas® Helps Set the Scene in Stunning Natural Surroundings - Glacier Skywalk, Canadian Rockies glassonweb.com

Others also read

A front door can be a status symbol. By choosing the right door, you can enhance the beauty of your whole property.
This paper will describe the design, detailing, testing and construction of structural glass beams as part of load bearing grid shell structure in the newly built Zaryadye Park in Moscow, Russia.
This year the special show will address the four focal themes Interactive Façades/Display Glass, Energy and Performance, Structural Glass and New Technologies.
Arup are consulting engineers for a series of recent projects involving curved glass: The High Roller observation wheel in Las Vegas and a revolving feature lift for the new Louis Vuitton townhouse in London.
This article will focus on the edge stability of PVB and ionoplast laminates and address the potential causes of blemishes.
With the myriad of glass type available now, it is often confusing what to choose in terms of safety, thermal and solar performance and balancing cost with the benefits on offer.

FROM INDUSTRY

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

No. 160 Yichuan Rd.,
Jiaonan Shi
Qingdao Shi
Shandong Sheng, 266000
China

Ottergemsesteenweg 707-Zuid
9000 Ghent
Belgium

Is Kuleleri, Kule: 2, Kat: 22, 4. Levent
34330 Levent-Istanbul/İstanbul
Turkey

Schaliënhoevedreef 20-D,
2800 Mechelen
Belgium

40 Corniche El-Nil,
Al Sharafain Tower Maadi,
Cairo Governorate
11728
Egypt

Add new comment