Sedak BAU innovations: edge protection made from glass and glass spacers for insulation glass

With "sedak clear-edge" even the edges of thin laminates can be effectively and transparently protected.
Photo source
www.sedak.com

Date: 31 January 2019

At BAU, sedak presented Innovative products with functional transparency.

At BAU, sedak presented two examples of how it has a clear edge in glass construction: firstly with the glass impact and edge protection "sedak clear-edge" for parapets, hand rails and edges of constructional glass building components, and secondly with a glass spacer for insulation glass – "sedak isopure". Both of these innovations increase the level of transparency as functional tailor-made detail solutions, especially in all-glass constructions.

With "sedak clear-edge" the glass processor based in Gersthofen, Germany, has developed a transparent, aesthetically attractive edging solution for exposed glass edges, for example on glass parapets or hand rails. This special glass strip is laminated onto the edge, providing it with a neat and clean conclusion.

With its highly polished sides and absolutely flat glass surface, "sedak clear-edge" sets functional and aesthetic accents. The open edge of the glass composite is protected from the influences of the weather, the laminated-on glass acts as protection against impacts, thus enabling two-pane laminates where the building regulations previously required three-pane laminates to be used.

With "sedak clear-edge" even the edges of thin laminates can be effectively and transparently protected.
With "sedak clear-edge" even the edges of thin laminates can be effectively and transparently protected. Photo: sedak GmbH & Co. KG

 

It looks like glass, glass and glass

With "sedak isopure" insulation glass façades look even more transparent. These glass spacers, which are utilized on two sides of the pane, cause the joints between the glass elements to be optically dissipated. "Glass façades with sedak isopure are almost uninterruptedly transparent. In combination with glass fins as supporting structural elements, highly transparent glass façades with up-to-date energy standards can be created", explained sedak Managing Director Bernhard Veh.

A glass spacer: With "sedak isopure" insulation glass elements that provide transparency right into the joints can be created.
A glass spacer: With "sedak isopure" insulation glass elements that provide transparency right into the joints can be created. Photo: sedak GmbH & Co. KG

 

Enormously popular exhibits

The trade fair was very positive for sedak. This was mainly due to the excellent response from the public. Veh: "Our stand was constantly very busy. We were especially pleased that four guided tours for architects visited sedak – with more than 2000 exhibitors this makes us feel especially honoured". Among others, the internationally renowned daylight expert Ulrike Brandi brought a group of planners to the sedak stand in hall C3. 

Sedak BAU innovations: edge protection made from glass and glass spacers for insulation glass
Photos: sedak GmbH & Co. KG
600450 Sedak BAU innovations: edge protection made from glass and glass spacers for insulation glass glassonweb.com

Others also read

Kuraray will take part in the Glass Trends Sessions at glasstec 2026, with Allan Gibson of Kuraray Europe GmbH presenting new research on overcoming a long-standing challenge in laminated glass design.
Dr. Stephen Morse of Michigan Technological University shares first-look results on vacuum insulated glass (VIG) durability at the FGIA Fall Conference.
Lakisha A. Woods previews GlassBuild America 2026, where clarity, connection and community come together to help the glass industry navigate an unpredictable year ahead.
An environmental psychologist reported on the latest lighting research and the impact of lighting on human health during the Fenestration & Glazing Industry Alliance (FGIA) Fall Conference in Calgary, AB.
At GlassBuild America, Glaston showcases its full automation portfolio across tempering, lamination, insulating and windshield glass manufacturing — proof that the future of glass processing starts now.
Glass shops are under pressure to do more with less. A+W Software has the tools to help.

Add new comment

From industry

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

NEWS RELATED PRODUCTS