Related products

Full range of bird friendly glass and glazing, combining Saint-Gobain ‘s COOL-LITE® solar control coated glass with several processing and technologies, creating thus “visible” contrast for birds, to avoid collision with glass façades and preserve biodiversity.

AEON Clear Float Glass is made by high-quality sand, natural ores and chemical materials by mixing them and melting them at high temperature.

AEON Colored/Clear Patterned Glass range comprises more than 50 patterns, designed to create a sophisticated environment in which to live.

AEON Tempered Glass is made by heating flat glass to just below its softening temperature (650°C) and suddenly chilling it with jets of cold air.

Looking for highly efficient automotive glass pre-processing? Looking for highly efficient thin glass pre-processing?

One material, endless possibilities: our float glass is the basis of all the glass products we develop. Made from natural materials, it is 100% recyclable.

The BTG-8 is a high-precision measurement system designed for accurate glass thickness evaluation across production and laboratory environments. Engineered for reliability and repeatability, it supports manufacturers in maintaining strict dimensional tolerances and consistent product quality.

The BTR-1S is a high-precision optical measurement system designed to evaluate visible light transmittance, reflectance, and haze in glass products. Engineered for accuracy and repeatability, it supports manufacturers in verifying optical performance and ensuring compliance with modern architectural glass requirements.

Continuously cut and convey glass interlayer material with consistent speed and control

The "Clear & Tinted Flat Glass" category includes Şişecam Clear, Şişecam Extra Clear, Şişecam Ultra Clear, and Şişecam Tinted.

Selecting the right glass for residential applications is important, not just in terms of how the glass looks, but also about how it performs in terms of solar control, security, sound reduction, thermal insulation and privacy.

In this sector, two very different needs must be fully-satisfied, and without compromise.

LiTROS offers production lines, systems and accessories for the efficient processing of flat glass. These systems ensure simplicity, quality and efficiency in flat glass processing.

The FZT-2 is a fully automatic optical inspection system designed for precise zebra angle measurement in float glass. Engineered for laboratory and quality-control environments, it delivers objective, repeatable data to support distortion evaluation and process stability in glass manufacturing.

Glass Cutting Machine; glas.C Pro Cutting Machine, glas.C Cutting machine

With the LiTROS glass cutting lines and systems are made more efficient and safer. The stand alone systems can be modularly combined to form a glass cutting line.

Glass loader/unloader

Looking for state-of-the-art handling equipment? Looking to handle flat glass or windows efficiently? Looking for an optimal addition to your glass-handling equipment?

Powerful, cordless, hand-held glass interlayer cutter

The tables are assembled in a whole to gain strength and avoid possible tensions. Its mechanical design allows the absortion of the vibrations produced by the high accelerations and speeds, thus optimizing the quality and precision of the cut.

FEATURES: High furnace capacity up to 1200 t/d, high quality glass for architecture or automotive purpose, low energy consumption, low emmission values.

FEATURES: Project management, Batch plant, Melting furnace (HORN), Forming, Annealing, Inspection, Packing, Utilities.

The tables are assembled in a whole to gain strength and avoid possible tensions. Its mechanical design allows the absortion of the vibrations produced by the high accelerations and speeds, thus optimizing the quality and precision of the cut.

Simple, motorized access to multiple material rolls for end-of-table spreading

To answer a major trend in architecture, we think big. Our large-scale range includes glass panes with dimensions up to 18 x 3,21m with or without coating.

The Power Feed System continuously supplies material for the length of marker or until the roll is consumed.

A sustainable solution with an individual look: our printable front glass for solar panels offers design options that make photovoltaics presentable.

Şişecam Tentesol and Şişecam Tentesol Titanium provides solar control.

Thickness: 1.8mm, 2mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm, etc. Sizes: 1220x1830mm, 1600x2200mm, 1650x2140mm, 1830x2440mm, 2140x3300mm, 2140x3660mm, 2250x3300mm, 2440x3660mm, 3300x5100mm, etc.

Single- to low-ply precision cutting, marking, and punching of glass interlayer material

Guardian SatinDeco® acid-etched translucent glass is ideal for both interior and exterior applications.

Here you will find a wide range of second-hand insulating glass machinery at the click of a button. The advantages of second-hand machinery include low investments, short amortisation periods and only a small reduction in value when equipment is resold.

Through extensive research and development, Unelko now offers Glass Science products specifically designed to clean and protect solar panels.

The "Solar Energy Glass" category includes Şişecam SolarMax and Şişecam Charger.

Şişecam Climax Select, Şişecam Ecosol, Şişecam Ecosol T, Şişecam Duosol, Şişecam Duosol T and Şişecam Prosol T provides heat and solar control.

How to clean solar panels and maximize performance

Automatic handling and storage smart systems for optimizing the production flow of the glass factory. Tailor-made solutions ensuring high productivity, accurate quality control and increased safety.

Tailor-made projects for glass sheets of 9, 12, 15, 18 meters…

Ensure a smooth production with the LiSEC stand-alone machines.

To perfectly match your production requirements, we provide LiSEC lines tailor-made for your production. Combine innovative machines for glass processing, cutting, tempering and logistics into a complete line system.

Exclusive system for cutting laminated glass that enables to dramatically increase productivity by means of two independent cutting bridges working simultaneously and an automatic loader.