Thermix TX Pro will be introduced in Italy

Thermix spacers from Ensinger provide for the "warm edge" in insulation glazing – Passive House certified.
Photo source
Ensinger GmbH

Date: 27 July 2017

Ensinger and CIV System show further improved Thermix spacer for insulating glass units with a warm edge at Vitrum.

This year’s Vitrum (3-6 October 2017) is expected to attract roughly 350 exhibitors and more than 18,000 visitors to Milan.

Ensinger and its partner for Italy, CIV System, will be presenting the new Thermix TX Pro spacer. The successor of the well-established Thermix TX.N plus comes lighter and with a slightly improved Psi-value.

“Aim of the facelift was to further improve the workability of our spacer”, says Andreas Prechtl, Export Sales Manager at Ensinger. “Thermix TX Pro is similarly stable, yet lighter. The lower mass inertia leads to less swinging and therefore to reduced material stress. So the bending process runs even smoother.”

Thermix spacers from Ensinger provide for the "warm edge" in insulation glazing – Passive House certified.
Thermix spacers from Ensinger provide for the "warm edge" in insulation
glazing – Passive House certified.
Picture: Ensinger GmbH

 

Efficient performance

“How well Thermix spacers work in practice can be seen live during the Vitrum fair”, says Andreas Prechtl. “Lombarda Macchine, manufacturer for bending machines, will be showing the bending process with Thermix on a demonstration line at its stand.”

Rigid Thermix spacers make it easy to replace traditional aluminum bars in IGU processing. Thanks to the combination of highly insulating plastic, reinforcing wires and a thin stainless-steel diffusion barrier, Thermix spacers have very good thermal properties and enable insulation glazing with outstanding UW values.

Warm edge spacers like Thermix allow for creating superior insulation glazing, e.g. at Ryerson University’s new Student Learning Centre in Toronto, Canada. Picture: Ensinger GmbH / Lorne Bridgeman Picture caption: Ensinger GmbH
Warm edge spacers like Thermix allow for creating superior insulation glazing, e.g. at Ryerson University’s new Student Learning Centre in Toronto, Canada.
Picture: Ensinger GmbH

 

Certified component

Ensinger, a leading specialist for engineered plastics, is continuously refining Thermix, one of the first hybrid spacers.

“The product range includes spacers, muntin bars and matching accessories. IGU manufacturers in Italy can rely on quick local supply and support through insulating glass expert CIV System,” says Claudio Feduzi, CEO at CIV System, a leading partner to Italy’s insulation glazing industry.

Recently, Thermix once again received the seal of the independent Passive House Institute. Its tested thermal characteristic values offer reliable planning assistance for energy-efficient buildings, for example, using energy balancing software. Thermix is suitable for low-energy and passive houses in warm to cold climate zones.

Further information: www.thermix.de/en , www.civsystem.com, www.lombardamacchine.com/en/

600450 Thermix TX Pro will be introduced in Italy glassonweb.com

Others also read

The Glass Alliance Standards Center, powered by Fenzi Group, offers innovative, state-of-the-art technical services for the glass industry.
For several months Viprotron has been working in secret on an important project. And now it is live!
Independent Life Cycle Assessments for Kuraray Poval™, PVB, PVB film and SentryGlas®.
HEGLA is proud to introduce the Laserbird, a system that can manipulate the top layer of a pane of glass up to 9,000 x 3,300 mm in size.
After a long wait, it is now official: RD Clean Concept has been patented in Italy.
22 years in Schiatti: Mauro Benetello reflects on his journey from quality to spare parts office.

Add new comment

From industry

Via Del Lavoro Snc
64023 Mosciano Sant’Angelo TE
Italy

Via per Monastier, 4
31056 Vallio di Roncade TV
Italy

Am Pfahlgraben 4
35415 Pohlheim
Germany

NEWS RELATED PRODUCTS