Schraml combiFIN - Vertical CNC production system for processing flat glass

Date: 9 June 2021

Photo source

LiSEC Austria GmbH

Date: 9 June 2021

The combiFIN is the fastest and most uncomplicated type of vertical processing of medium-sized glass formats with optimum cycle times and cost-effectiveness.

combiFIN combines intelligent processing devices into a logical unit and also allows the individual components to be used independently. Typically, the line is formed by a GLX P1 grinding and polishing machine in combination with an MRX G7 drilling and milling centre. A topDRILL© drilling machine can be used instead of the MRX G7, soon also with patented water jet technology as additional equipment. All devices are CNC-controlled. The range is complemented by topCLEAR washing machines and mechanical water treatment systems.

600450

LiSEC Austria GmbH

2021-06-09T09:33:37

Schraml combiFIN - Vertical CNC production system for processing flat glass glassonweb.com

See more news about:

WhatsApp LINKEDIN FACEBOOK X PRINT MORE

Others also read

MORE...

Saint-Gobain and AGC to Build World's Largest Electric Furnace for Flat Glass, Cutting CO₂ Emissions by Up to 50%

Saint-Gobain and AGC are joining forces to deploy a world-first, large-scale hybrid electric furnace at Saint-Gobain's Avilés plant in Spain, set to cut CO₂ emissions from flat glass production by around 50%.

Glass for Europe publishes a new paper on the harmonised calculation of recycled content in flat glass

Glass can be recycled indefinitely, and using glass cullet in production reduces the need for virgin raw materials, energy consumption and greenhouse gas emissions.

ASTM Glass Committee Developing Proposed Standard for Decorative Enamel on Glass

Specification will include enamel application standards on all types of glass for quality assessment.

@ LiSEC; Elias Leichtfried, Head of Product Management for Glass Processing, in front of the LSP-A

glasstec 2026: LiSEC LSP-A – Two lasers, one system for flexible glass processing

With the LSP-A, LiSEC is presenting a laser solution at glasstec 2026 that combines two different laser processes in one system.

© LiSEC; Dragan Krusic (Production Manager), Enea Durollari (LiSEC) and Dejan Krusic (CEO) front of the new LiSEC BSV-45NK bender

LiSEC & Profiglass: Reliable spacer bending as the basis for consistent insulating glass quality

Profiglass has been working with LiSEC technology since the early 1990s, integrating various machines for insulating glass production and spacer processing over the years.

Glass for Europe’s initial reaction to the proposal for an ETS reform

On 17 July, the European Commission adopted its proposal for the ETS reform. Glass for Europe is currently conducted a detailed assessment of the legislative proposal. The text below is the press release which was sent following the adoption.