New standards on glass for the building industry

Date: 14 December 2001

Eight new standards on glass for the building industry recently published as UNI standards. UNI EN 12150-1 "Glass in building - Thermally toughened soda lime silicate safety glass - Definition and description." UNI EN 12337-1 "Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description." UNI EN 1063 "Glass in building - Security glazing - Testing and classification of resistance against bullet attack." UNI EN 1288-1 "Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass." UNI EN 1288-2 "Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas." UNI EN 1288-3 "Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)." UNI EN 1288-4 "Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass." UNI EN 1288-5 "Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas." See additional information on the source link bellow [ITA].

Eight new standards on glass for the building industry recently published as UNI standards.

UNI EN 12150-1 "Glass in building - Thermally toughened soda lime silicate safety glass - Definition and description."

UNI EN 12337-1 "Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description."

UNI EN 1063 "Glass in building - Security glazing - Testing and classification of resistance against bullet attack."

UNI EN 1288-1 "Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass."

UNI EN 1288-2 "Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas."

UNI EN 1288-3 "Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)."

UNI EN 1288-4 "Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass."

UNI EN 1288-5 "Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas."

See additional information on the source link bellow [ITA].

600450

UNI

2001-12-14T12:00:00

New standards on glass for the building industry glassonweb.com

Others also read

MORE...

R.C.N. Solutions: the making of a rotary bending system

For R.C.N. Solutions, the production of one rotary bending system has been a big challenge, lived intensely.

Solar control low-e coatings like Solarban® 70 glass, featured at UC San Diego’s Living Learning Neighborhood, deliver a return on carbon by dramatically reducing a building’s operational carbon every year.

Vitro Architectural Glass Updates EPDs to Meet Low Embodied Carbon Standards

Vitro Architectural Glass achieves Top 20% LEC rating with updated EPDs.

CMS smartline: the ideal waterjet machine for processing laminated safety glass

Cutting thick safety glass without compromising on cycle times can be quite a challenge, especially if the glass is thicker than 19mm and has a curved shape.

RCN Solutions Supplies Viraver Technology for Special Bending Project

Viraver Technology Srl and RCN Solutions forge an innovative path in high-tech curved glass production.

Folienwerk Wolfen GmbH to Showcase at the Glasbau Conference 2024 in Dresden

Folienwerk Wolfen GmbH Joins Glasbau Conference

Folienwerk Wolfen GmbH is excited to announce its participation in the Glasbau Conference scheduled for April 4th and 5th, 2024, at the campus of the Technical University of Dresden.

Specialty Fenestration Group Hosts Successful Annual Sales Meeting

Specialty Fenestration Group (SFG), parent company of Quikserv Inc. and US Bullet Proofing (USBP), recently hosted their annual sales meeting in Houston, Texas.

From industry