Do you process safety glass? CMS smartline is the ideal solution for you!

Do you process safety glass? CMS smartline is the ideal solution for you!
Photo source
www.cms.it

Date: 15 July 2021

Cutting thick safety glass without compromising on cycle times can be quite a challenge, especially if the glass is thicker than 19mm and has a curved shape.

With this in mind, Cms offers an extremely cost-effective solution. Cms has specifically developed the smartline, the ultimate waterjet cutting system for glass available in 3 and 5-axis configurations.

Do you process safety glass? CMS smartline is the ideal solution for you!

EXCLUSIVE BENEFITS

  • Up to 33% faster cutting cycle times with 50m/min rapid speed and 3 m/s2 of acceleration- the best in its category
  • +/- 0.07mm positioning accuracy
  • +/- 0.05mm repeatability
  • Best in class price/performance ratio

The machine can process up to 4m x 2m glass sheets, with a minimum allowance of 0.5mm by cutting them with water and abrasive at 185mm/min, ensuring consistent quality standards.

The cutting head reaches an impressive speed of 50m/min with acceleration of 3m/s2, setting the highest standard in its category.

CMS smartline offers a sturdy and compact frame, integrating linear guides, and class H5 rack-and-pinion movement system on the tank, capable of withstanding high speeds and acceleration without compromising cutting accuracy and repeatability.

Do you process safety glass? CMS smartline is the ideal solution for you!

The durability and reliability over time of the kinematic components are ensured by the NC managed automatic lubrication system.

A system of thermo-welded techno-polymer bellows protects the guides form water and abrasive erosion during cutting while the protection of the bridge is ensured by a sheet metal labyrinth offering greater resistance to the direct action of reverberations.

Do you process safety glass? CMS smartline is the ideal solution for you!

600450 Do you process safety glass? CMS smartline is the ideal solution for you! glassonweb.com

See more news about:

Others also read

The latest LiSEC float cutting technology went into operation at Arbonia Glassysteme GmbH in Deggendorf in February 2023.
The new technology, which has been part of the ProLam LSR series equipment for just under three years, promises four advantages.
On February 10th, RCN was pleased to open their doors to the students of two classes of the middle school IC NOVIGLIO-CASARILE, from the province of Milan. 
RCN Solutions have just completed the installation and training of one Lammy System 2+2 in Australia.
Exhibitors give thumbs up to innovations, already 8,000 m2 reserved and more than 100 businesses registered in the first month of sales.
Discover the benefits of chemical glass tempering with RCN's CT80S oven.

Add new comment

From industry

Via per Monastier, 4
31056 Vallio di Roncade TV
Italy

Ctra. Estación Km. 15.8
44415 Rubielos de Mora Teruel
Spain

Via A. Locatelli 123,
24019 Zogno BG
Italy

Via Del Lavoro Snc
64023 Mosciano Sant’Angelo TE
Italy

NEWS RELATED PRODUCTS

Officina Meccanica Schiatti Angelo S.r.l.
Officina Meccanica Schiatti Angelo S.r.l.
Officina Meccanica Schiatti Angelo S.r.l.
Adelio Lattuada S.r.l.