Turomas and Cerviglas, a relationship that goes beyond glass cutting

Cerviglas and Turomas, a relationship that goes beyond glass cutting
Photo source
www.turomas.com

Date: 3 March 2022

Interview with Vicente Cervera, president of Cerviglas.

"In the 1980s, we bought one of the first glass cutting machines manufactured by Miguel Tomas. Since then, we have built a very strong relationship both professionally and personally." - Vicente Cervera, presidente de Cerviglas

Interview with Vicente Cervera, president of Cerviglas.

Grupo Cerviglas, founded in Turís, Valencia in 1980 has been giving life to glass for more than 40 years. This long history, combined with experience, technological innovation and the ability to anticipate market demands, has positioned this Valencian company as a national market leader in the design and development of cutting-edge projects.

It currently has a team of more than 130 person and a production area of 70.000m2 in which all the processes of design, transformation and glass production are carried out.

CERVIGLAS Installation (Turis, Valencia)
CERVIGLAS Installation (Turis, Valencia)

Renewal of cutting machinery.

In its commitment to differentiation and quality, CERVIGLAS maintains a policy of constant investment in production technologies. Therefore, in 2019 it began a process of renovation of all glass cutting lines for both monolithic and laminated glass.

"In 2019 we started the replacement of all cutting machines, which were already TUROMAS branded, with the manufacturer's new models."- Vicente Cervera, presidente de Cerviglas

New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS

The process culminated last February with the installation of the last of the 4 cutting lines acquired. The new machinery is composed of:

RUBI 516C jumbo monolithic glass cutting line. Specially designed to work as part of an automatic cutting line, its linear motor technology guarantees unprecedented performance and quality in any type of cutting.

LAM 304 cutting table for laminated glass. Semi-automatic table for cutting laminated glass up to mm3700 and thicknesses of 10+10 mm. It incorporates ultra-fast quartz lamp, vacuum devices for the clamping and stretching of the glass from the lower part and blade, thus allowing the processing of Low-E glass with total safety.

Two automatic cutting lines for laminated glass LAM 505SXR y LAM 506SXRBoth lines are designed for companies that require maximum productivity and automation. They allow to position, rotate, pickle, cut and separate glass up to 12 + 12 mm in a fully automatic way even on high hardness and stiffness butyral glass.

New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS

The useful cut of both lines LAM 505SXR and LAM 506SXR is 4700 mm and 6000 mm respectively. 

In short, four cutting machines that integrate the latest innovations and technological developments that will allow CERVIGLAS to meet and respond to the high quality and productivity requirements of its customers.

New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS
New cutting lines RUBI 5016C LAM 304, LAM505SXR for 4700 mm and LAM506SXR for 6000 mm from TUROMAS

TUROMAS AND CERVIGLAS

The relationship between CERVIGLAS and TUROMAS has a long history. It began in the 80s with the purchase of one of the first machines manufactured by Miguel Tomás, founder of TUROMAS. Since then, the trust placed by the group in the brand and the TUROMAS team has been complete.

Antonio Ortega, TUROMAS General Manager; Alvaro Tomás, TUROMAS Vice President; Miguel Tomás, TUROMAS President; Carles Almela, Cerviglas Process Manager; David Cervera, Cerviglas Financial Controller; Vicente Cervera, Cerviglas President; Javier Cervera, Cerviglas Deputy Director.
Antonio Ortega, TUROMAS General Manager; Alvaro Tomás, TUROMAS Vice President; Miguel Tomás, TUROMAS President; Carles Almela, Cerviglas Process Manager; David Cervera, Cerviglas Financial Controller; Vicente Cervera, Cerviglas President; Javier Cervera, Cerviglas Deputy Director.

"TUROMAS has service, quality and efficiency. It gives unquestionable profitability. I don't consider that there are other manufacturers in the market that can surpass them." - Vicente Cervera, presidente de Cerviglas

Each and every one of the cutting tables that have passed through the Cerviglas facilities in these 40 years of history have been exclusively TUROMAS brand. In total, about 20 cutting equipment that have accompanied the Valencian manufacturer in its continuous process of evolution.

A growth process in which both companies have gone hand in hand, becoming technological partners that share experiences and knowledge to face new developments and future projects.

Cerviglas offers tailor-made projects for all types of constructions, both large architectural projects and interior spaces, giving priority to quality, safety, aesthetics and comfort.

Among its latest projects are the 9 d’octubre Administrative Complex (Valencia, Spain), the EDEM Business School and Entrepreneurship Building LANZADERA designed by Juan Añón, the new hospital of La Fé (Valencia, Spain) by Ramón Esteve and Alfonso Casares, and the City of Arts and Sciences of Valencia, designed by Santiago Calatrava.

600450 Turomas and Cerviglas, a relationship that goes beyond glass cutting glassonweb.com

Others also read

When we tell the story of our team, we always end up meeting life paths: young knocking on our door with the hesitation of who just dropped out of school, people with bags full of dreams and ambitions.
TUROMAS, Spanish manufacturer of flat glass machinery participates as exhibitor in the last edition of Glass South America.
The 2022 Special Review Conference of science popularization was presided over by Li Cundong, secretary general of Architectural Society of China.
As the conceptual sponsor and cooperation partner of Messe Düsseldorf, the VDMA Glass Technology Forum is responsible for key programme content at the glasstec conference and activities at its own stand in Hall 15B26.
Thanks to the new CMS maxima machining center and the advanced system developed by CMS, BCE Glass Industry is the ideal partner to its demanding clients.
See you in Las Vegas, Oct. 18-20. Register Now.

Add new comment

From industry

Ctra. Estación Km. 15.8
44415 Rubielos de Mora Teruel
Spain

Polígono Lalín 2000
36512 Lalín Pontevedra
Spain

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

Ronda Shimizu, 16 - Pol. Ind. Can Torrella
08233 Vacarisses (Barcelona) Barcelona
Spain

NEWS RELATED PRODUCTS