Sparklike: IG-line integrated and non-destructive turnkey system for argon measurement

IG-line integrated and non-destructive turnkey system for argon measurement
Photo source
sparklike.com
Until recently, there has been a somewhat important gap to be bridged between insulating glass production and comprehensive quality control.

However, to ensure that the IGU's meet the prevailing standards and norms about u-value, it is important to be able to measure the quality of the produced insulating glass units – systematically and automatically. 

Moreover, because of the increasing global competition and customers’ higher expectations for insulating glass performance, the industry is likely going to see a relatively rapid development towards 100% quality controlled and documented IGU’s.

At the same time, as the reputation and continued operation are dependent on the quality and durability of the units produced, quality control is rightfully high on insulating glass manufactures' priority. Especially, as competition is increasingly demanding manufacturers to yield towards longer product lifespan and warranties.

For the longest time, there has been an important commitment by most manufacturers to build insulating glass units which meet or exceed the current standards for finished IG units and their u-value. The sole hindrance being that, until recently, only a handful of IG manufacturers have had the equipment in their disposal to control the argon concentration in an automated way. 

However, due to some never-before-seen advances in quality control and argon measurement technology, it has become possible to measure the argon concentration with an IG-line integrated non-destructive turnkey system. The measurement can be done for both, triple and double glazed IGU's, even through coatings and laminated glasses. 

Sparklike Online™ - IG-line integrated and non-destructive turnkey system for  argon measurement

Sparklike Online™ - IG-line integrated and non-destructive turnkey system for  argon measurement
Sparklike Online™ - IG-line integrated and non-destructive turnkey system for 
argon measurement 

IG-manufacturers worldwide have now the possibility to control the proper functioning of the gas press in an automated way. Similar installations have already been realised with Sparklike Laser™ measuring components, but now everything is available ready-made, including installation, commissioning and training.

Furthermore, the measurement system's dimensions and speed are compatible with all kinds of IG lines and the level of integration can be adapted based on the customer’s needs and product line requirements. 

TO DOWNLOAD THE PRODUCT LEAFLET, CLICK THE LINK BELOW:

DOWNLOAD SPARKLIKE ONLINE BROCHURE

An operating Sparklike Online™ will be demonstrated at this year’s glasstec event at stand number 14B38. The event will take place in Düsseldorf between the 23rd and the 26th of October 2018. In addition, Sparklike is also planning on presenting the system at next year's Glass Performance Days (GPD) event, held in Tampere in June 2019. 

IG-line integrated and non-destructive turnkey system for argon measurement

BY JARNO HARTIKAINEN

600450 Sparklike: IG-line integrated and non-destructive turnkey system for argon measurement glassonweb.com

Others also read

Unelko offers Quality, Performance & Value with Innovative Invisible Shield® PRO 15 & REPEL® Glass Coatings!
Laminated glass with evguard® laminating film is certified and tested worldwide by various testing institutions and can therefore withstand the highest security requirements in public buildings both indoors and outdoors. 
Robert Bürkle GmbH launches a new inline process developed for the lamination of flat glass with particularly short cycle times.
EVERLAM presents EVERLAMTM COOL — its new high-performance PVB film for use in laminated glass, which provides high protection against infra-red light.
SGT Oelsnitz – a leading producer of safety glass in Europe – has recently opted for seven LineScanners from SOFTSOLUTION.
TRADITION ADVANCED – this is the title under which RATH presents its refractory expertise for the glass industry at Glasstec 2018 in Düsseldorf.

From industry

Am Pfahlgraben 4
35415 Pohlheim
Germany

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

NEWS RELATED PRODUCTS

Add new comment