Wrightstyle and an aluminium anniversary

Date: 20 July 2015
Source: Wrightstyle
Wrightstyle is one of Europe’s leading suppliers of advanced steel and aluminium glazing systems, supplying fire and blast resistant systems worldwide.

Tim Kempster, Wrightstyle’s MD takes a look at bomb blast safety – and Wrightstyle’s proven system. If it was a wedding anniversary, a traditional gift – somewhat unromantic - is aluminium, which makes some sense because we supply glazing systems in both aluminium and steel. However, for us, it’s an important anniversary because it was ten years ago that we first introduced a market-leading glazing system that could withstand the pressure impact of a lorry bomb. It was ground-breaking at the time, because there were more than a few doubters who said that a glazing system couldn’t resist such an immense blast pressure. But we developed our structurally-glazed system, and independently tested it against the equivalent of 500 kilos of TNT, acknowledged to be the explosive impact of a lorry bomb, and roughly ten times the size of a car bomb. Known in the industry for developing glazing solutions for challenging specifications, Wrightstyle was initially approached with a set of criteria for the Central Security and Co-ordination Command Centre for the Asian Games hosted in Doha, Qatar in December 2006. Initially designed to protect and prevent any disruption to the critical operations of the Games’ co-ordination, the USD $31million building also had to be designed with the intention to hand it over to the Qatar military on completion of the Asian Games. The strict criteria from the project architects and consultants required the majority of the external glazing to mitigate the effects of a medium size lorry bomb and a close range car bomb. Other requirements were for the glazing to have solar control, be thermally performing, but to have an external sight line of less than 20mm and internal sightline of less than 60mm to maximise vision to the building exterior – project requirements for which there was no tested system available on the market. Our solution was achieved through a high-specification structural glazing technique that bonds the glass to the framing support system so that, in an explosion, the components work together to safely absorb the thermal shock of the explosion. The successful tests were carried out independently by Advantica Limited at a specialist site within RAF Spadeadam, Northumberland. The simulated lorry bomb attack was immediately followed by a simulated car bomb attack (100 kilos of TNT). The lorry bomb was detonated 75 metres from the test rig and the car bomb was detonated at a distance of 20 metres, producing a higher loading on the façade. The Wrightstyle system set a new benchmark for a glazing system to mitigate against blast attack and, with terrorism much in the news, has now been supplied to a number of projects in the United States, UK, and the MENA and Asia-Pacific regions. It is a worldwide success, protecting high-risk buildings and those adjacent to them. We’ve also been pushing the boundaries – for example, to make our advanced system look no different from non-protected glazing systems. Such an achievement deserves more than a lump of aluminium but, being also being a supplier of aluminium glazing systems, we could make good use of it. To receive Wrightstyle’s regular newsletter, simply subscribe at www.wrightstyle.co.uk www.wrightstyle.co.uk Ends Further information: Jane Embury, Wrightstyle +44 (0) 1380 722 239 jane.embury@wrightstyle.co.uk Media enquiries to Charlie Laidlaw, David Gray PR +44 (0) 1620 844736 (m) +44 (0) 7890 396518 Charlie.laidlaw@yahoo.co.ukWrightstyle is one of Europe’s leading suppliers of advanced steel and aluminium glazing systems, supplying fire and blast resistant systems worldwide.   

Tim Kempster, Wrightstyle’s MD takes a look at bomb blast safety – and Wrightstyle’s proven system. If it was a wedding anniversary, a traditional gift – somewhat unromantic - is aluminium, which makes some sense because we supply glazing systems in both aluminium and steel.

However, for us, it’s an important anniversary because it was ten years ago that we first introduced a market-leading glazing system that could withstand the pressure impact of a lorry bomb. It was ground-breaking at the time, because there were more than a few doubters who said that a glazing system couldn’t resist such an immense blast pressure.

But we developed our structurally-glazed system, and independently tested it against the equivalent of 500 kilos of TNT, acknowledged to be the explosive impact of a lorry bomb, and roughly ten times the size of a car bomb. Known in the industry for developing glazing solutions for challenging specifications, Wrightstyle was initially approached with a set of criteria for the Central Security and Co-ordination Command Centre for the Asian Games hosted in Doha, Qatar in December 2006.

Initially designed to protect and prevent any disruption to the critical operations of the Games’ co-ordination, the USD $31million building also had to be designed with the intention to hand it over to the Qatar military on completion of the Asian Games. The strict criteria from the project architects and consultants required the majority of the external glazing to mitigate the effects of a medium size lorry bomb and a close range car bomb.

Other requirements were for the glazing to have solar control, be thermally performing, but to have an external sight line of less than 20mm and internal sightline of less than 60mm to maximise vision to the building exterior – project requirements for which there was no tested system available on the market.

Our solution was achieved through a high-specification structural glazing technique that bonds the glass to the framing support system so that, in an explosion, the components work together to safely absorb the thermal shock of the explosion. The successful tests were carried out independently by Advantica Limited at a specialist site within RAF Spadeadam, Northumberland. The simulated lorry bomb attack was immediately followed by a simulated car bomb attack (100 kilos of TNT).

The lorry bomb was detonated 75 metres from the test rig and the car bomb was detonated at a distance of 20 metres, producing a higher loading on the façade. The Wrightstyle system set a new benchmark for a glazing system to mitigate against blast attack and, with terrorism much in the news, has now been supplied to a number of projects in the United States, UK, and the MENA and Asia-Pacific regions. It is a worldwide success, protecting high-risk buildings and those adjacent to them.

We’ve also been pushing the boundaries – for example, to make our advanced system look no different from non-protected glazing systems. Such an achievement deserves more than a lump of aluminium but, being also being a supplier of aluminium glazing systems, we could make good use of it.

To receive Wrightstyle’s regular newsletter, simply subscribe at www.wrightstyle.co.uk www.wrightstyle.co.uk

Ends

Further information: Jane Embury, Wrightstyle +44 (0) 1380 722 239 jane.embury@wrightstyle.co.uk

Media enquiries to Charlie Laidlaw, David Gray PR +44 (0) 1620 844736 (m) +44 (0) 7890 396518 Charlie.laidlaw@yahoo.co.uk

600450 Wrightstyle and an aluminium anniversary glassonweb.com

Others also read

Howells Patent Glazing was appointed manufacturer and supplier of a bespoke glazing system for one of the greatest examples of Gothic Revival architecture in Britain, the Towers, known to millions as the centrepiece of Alton Towers Resort.
Dubai Investments Park passed the 5 million sq ft mark for built-up warehouse, office and commercial unit space sub-leased in 2018.
While looking for an interior/exterior folding glass wall solution for a new apartment complex in downtown Indianapolis, a customer reached out to Solar Innovations®.
‘Panorama C-ST®’ is a freestanding balustrade from Dani Alu offering a non-penetrative, aluminium balustrade system suitable for all designs and styles of publicly accessible balcony and roof terraces.
Britplas have been appointed as the external envelope supplier for the latest development of Qinetiq’s Portsdown Technology Park (PTP).
A full suite of Jack Aluminium Systems’ products were used in a £2.59m revamp of Strood Railway Station, part of the National Station Improvement Programme (NSIP).

From industry

10301 North Enterprise Drive
Mequon, WI 53092
United States

10924 Granite Street, Suite 200
Charlotte, NC 28273
United States

Schaliënhoevedreef 20-D,
2800 Mechelen
Belgium

Add new comment