Softsolution LineScanner | Automated Glass Inspection & Quality Control

Date: 9 October 2026
Source: Softsolution
Softsolution LineScanner | Automated Glass Inspection & Quality Control
Photo source
Softsolution

Date: 9 October 2026

Quality control belongs directly in the production line — where it matters most.

In this video, Markus Stefan, responsible for Softsolution’s home market as well as Northern and Eastern Europe, explains how the LineScanner supports automated glass quality inspection throughout the production process.

The LineScanner can detect a wide range of quality defects, including:

  • Scratches
  • Inclusions
  • Coating defects
  • Fingerprints
  • Dimensional and structural quality characteristics

For insulating glass production, many customers install the LineScanner directly on their IG lines to inspect glass after the washer.

Combined with the BowScanner, the system can also measure the overall bending of the glass before it enters the press. This helps prevent excessively bent glass from causing problems further down the production line.

More customers are also using the LineScanner for final quality inspection after the press, including checks of frame offset, Georgian bar angularity, and the actual build-up of the insulating glass unit.

At the heart of the system is Softsolution’s real scanning technology with sensor-based parallel light. It measures defects and displays them at their actual size.

All scans can then be stored in a centralized archive, providing detailed documentation for each individual piece of glass.

Find out more about the LineScanner: www.glassquality.com

600450 Softsolution LineScanner | Automated Glass Inspection & Quality Control glassonweb.com

Others also read

What if your inspection system could distinguish between a defect that exists — and a defect that actually matters?
For the first time, glass recovered from end-of-life automotive windshields has been successfully reintroduced into the production of new automotive glass.
Gregory Smith was invited to an in-depth Glasstec Talk and shared exciting insights – from triple glazing with thin glass in the middle to the fully automatic ProLam Neo for laminated glass cutting.
Four exciting days, around 7,000 visitors at the booth, valuable conversations, and an outstanding atmosphere: glasstec 2026 in Düsseldorf was a great success for LiSEC!
Discover how Flachglas Schweiz ensures consistent glass quality from day one with Viprotron’s Temper Scanner 5D, combining precise inspection, full traceability, and greater production efficiency.

Add new comment

From industry