Thermoflex Warm Edge Spacer with Free Inkjet Printing

Photo source
Thermoseal Group
Thermoflex Warm Edge Spacer can now be supplied with insulated glass (IG) sealed unit manufacturer company details inkjet-printed on its surface.

Leading UK manufacturer, Thermoseal Group offers this facility for free as part of its service commitment to customers.The Group’s Sales Director, Mark Hickox says: “Inkjet printing Thermoflex on our production lines means that we can offer a bespoke service to IG manufacturers and help them to achieve requirements for CE Marking.

This means that customers can now purchase a bespoke foam spacer with the lowest Thermal conductivity value of 0.135W/mK (according to Bundesverband Flachglas Data Sheet) from a leading UK manufacturer and at a competitive price.Thermoflex is also Passive House Approved with an A+ rating.

“Thermoflex Warm Edge Spacer is now an established product with many IG manufacturers using it to make highest performance IG sealed units. We have a strong relationship with our customers and make every effort to seek feedback and act upon their requests. It is because of this that we quickly introduced Thermoflex in a wide range of sizes in black and grey. We have also invested in additional buildings to house our growing Thermoflex production facility and increase our capacity four-fold.

“We currently supply over 50% of the spacer into the UK and this percentage is increasing on a continual basis. Thermobar and Thermoflex are two of the most thermally efficient spacer systems available, and now due to increased manufacturing capacity exciting times are ahead as we take our warm edge range onto the global market.

“Thermobar and Thermoflex are fully tested to EN1279 standards and various international standards which require performance over and above the 1279 minimum requirements. Both products are also subject to continual in-house batch testing to ensure that the products that we offer are always of the highest quality. All of Thermoseal Group’s products are in continual development in our innovation centre.

“We have invested massively in our innovation centre and EN1279 test facilities, to ensure that we understand the conditions within a glazing unit and how each component performs within the lifetime of the unit. This helps us to ensure that the components we manufacture and supply are second-to-none.

“Thermoflex sales are continually increasing with the growing demand for this product as customers try it and see its advantages in production.

“We are looking forward to demonstrating the benefits of Thermobar and Thermoflex at both the Fit Show and China Glass in April, and will again be exhibiting on the global glass industry’s leading stage at Glasstec Dusseldorf in September.”

To find out about Thermoseal Group and its comprehensive range of insulated glass components and machinery for glazing manufacture, call +44(0)121 331 3950 or visit www.thermosealgroup.com.

600450 Thermoflex Warm Edge Spacer with Free Inkjet Printing glassonweb.com

Others also read

CGH to exhibit architectural glass solutions at GlassBuild America
CGH will be joined in booth #751 by J.E. Berkowitz (JEB), Dlubak Specialty Glass, Global Security Glazing, Solar Seal, and Columbia Commercial Building Products.
SentryGlas® delivers clarity, strength and safety at Shum Yip Upperhills
Laminated glass using SentryGlas® was chosen for safety and insulating glass was specified to improve thermal performance.
Epwin Glass unaffected by glass shortage
Recent reports suggest there is a glass shortage in the UK that is threatening to affect the supply of glass IGUs to the industry.
Glass sheet 9.000 x 3.210 mm
On the occasion of its OPEN HOUSE 2018, Forel presented the innovative IG line “No Limits 9000” for large size formats, able to process insulating glass panels of up to 9 x 3.30 metres.
 Meriden Hall
Working with Hasker Architects and AGC Glass, Euroview supplied exceptionally flat glass for a contemporary facade office extension to a listed building.
At the glasstec the ConvectLam2 laminates flat glass in demo mode
LiSEC presents its product innovations at glasstec, which focus on the areas of glass cutting, glass processing, flat glass lamination, and insulating glass production.

From industry

Polígono Industrial El Bayo, parcela I, 19
24492 Cubillos del Sil León
Spain

Add new comment