Others also read
Pujol 100 PVB+ has not only helped to reduce investment costs but will also allow significant savings in costs derived from a higher energy efficiency.
Laminated Glass Production with LiSEC Machines: Speed Assembling Mode
How high-quality insulating glass is produced with LiSEC machines in Nord Rostock.
Pujol reinforces its position in the Indian market with a new Pujol 100 PVB+ installed in Vitra India Glass PVT. Ltd
Coating independent temperature monitoring and quality control in glass tempering furnaces
The LiSEC PlusLam is a laminated glass line equipped with sophisticated machines and sophisticated lamination technology.
Safti First, #1 USA-made fire rated glass manufacturer chooses the reliability of Pujol 100 PVB+ & Lam-Pro.
When investing in good quality, the costs of poor quality can significantly be reduced
The one-by-one mode is especially suitable for the series production of small glass at high speed with only one person. In addition, there is less foil waste due to the waste optimisation.
Roof and façade glass from Okalux and Glas Trösch for the TUM Campus in the Olympic Park in Munich
Bojar Glass in Poland has been running its Glaston FC Series tempering line without operator input since 2021. Check out how Glaston Autopilot is mastering the tempering process.
When designing a building on the edge of a desert, extreme climatic conditions are a particular challenge.
The basic mode of the LiSEC laminating glass machines! Watch the video now.
José Yepes, Mechanical Engineer and MAS has been appointed as Senior Vice President for Glaston Corporation’s new Business Area Mobility, Display & Solar and a member of the Executive Management Group.
Step Change brought together visionary pioneers in glass innovation for the third time since its inception.
Shandong Yaohua Glass: Austrian quality enriches Chinese insulating glass market
The Fenzi Group focused attention on TPS technology at the spring Glass Group meeting.
On June 14, just before the official Glass Performance Days 2023 Opening Ceremony in Tampere, Finland, Glaston hosted a Fireside Chat.
On June 14, Tampere, Finland, once again became the center of the global glass industry.
Jolene Hu from Sparklike China had an opportunity to interview one of Sparklike customer, Jiangsu Jiacheng Special Glass Manufacturing Co., Ltd.
With the machines and software solutions from LiSEC, it is possible to cover the entire process chain of flat glass processing from loading to data analysis with just one manufacturer.
Newest edition reflects advances in glass and glazing
Peter Pfannenstill will tell more about this on the podium during GPD Days in Tampere, Finland on June 14 - 16.
Empa researchers designed aerogel-filled glass bricks that are translucent as well as thermally insulating and strong.
On more than 70,000 square meters, Quartier Look21 in Stuttgart's city center accommodates living space, office space and even an event hall for up to 500 people.