Cms invests in a a new production area

Cms invests in a a new production area
Photo source

Date: 13 May 2021

The production center at Zogno has been enhanced with a new, state-of-the-art wing, from every point of view.

Investments at Cms never stop: we have developed a new production area!

The production center at Zogno has been enhanced with a new, state-of-the-art wing, from every point of view. An entire area designed specifically for the largest machines: 85,000 square meters that fully respect the environment and surrounding landscape, where the machines are moved using 8 overhead cranes that can hold 15 tons each.


7,740 the overall covered area of the new plant is 7,740 square meters

12 the usable internal height of the building is 12 meters

200 the lighting in the production areas is supplied by 200 Led floodlights that guarantee an average illumination in excess of 350 lux

10,000 when the wiring system was being created, approx. 10,000 meters of electric wiring was laid.

The warehouse facades, and their impact on the surrounding landscape, were designed in collaboration with the architect Cinzia Robbiati from the Archeology, Fine Arts and Landscape Authorities for the provinces of Bergamo and Brescia.

Its energetic rating is Class A1 while there is a solar panel system with 504 polycrystalline solar panels fitted on the roof providing an overall maximum power of 150 kW.

The flooring is 48 cm thick and was designed to withstand trials directly in loco and can support dynamic weights of 3,500 kg with a differential yielding of less than 2 hundredths of a mm.

The ideal place for performing the most challenging tests, in order to guarantee the absolute precision typical of all our machines.

600450 Cms invests in a a new production area

See more news about:

Others also read

On the last day of the fair, everything revolves around innovation and industry firsts at the virtual LiSEC Campus.
On the 21st of May, 2021, “2020 Henan Social Responsibility Awards Ceremony” was held grandly in Zhengzhou.
In this video Jan Anjema at Steinfort Glas BV in the Netherlands is sharing his & his team's experiences on working with Glaston FC Series tempering line.
In recent years, KIBING Group, XINYI Group, FLAT Group and other well-known enterprises have ordered more than 60 new NorthGlass tempering furnaces.
Mr. Visa Seppälä at Rakla Tampere Oy in Finland is sharing his and his team’s experiences on working with Glaston FC Series tempering line.
A three-day virtual event presenting the latest innovations and trends in glass processing

Add new comment

From industry

Via per Monastier, 4
31056 Vallio di Roncade TV

5, Atir Yeda Industrial Park, Kfar Saba,
Tel Aviv 44643

Ctra. Estación Km. 15.8
44415 Rubielos de Mora Teruel


Glasmik d.o.o. - Branch Office MARIBOR
Mappi International Srl
Officina Meccanica Schiatti Angelo S.r.l.
LISEC Austria GmbH
R.C.N. Solutions Srl
Adelio Lattuada S.r.l.