Others also read
UK leading double glazing components supplier and warm edge manufacturer, Thermoseal Group has recently taken on a Financial Controller Matt Hambley to substantiate its continued growth.
The new range of solar coatings by the Fenzi Group is bound to steal the scene at the Atlanta-based show taking stage from 12 to 14 September.
GLASSPRINT EARLY BIRD EXTENSION EXPIRES 31 JULY!The GlassPrint 2011 conference and exhibition is powered by glasstec and is Europe’s leading event for glass decoration.
Schaumburg, Ill. -- The EPA has announced that it will not be promulgating additional Clearance and Clearance Testing Requirements to the Lead: Renovation, Repair, and Painting Program (LRRP).
Italy´s booming solar power market is expected to grow nearly four times to 30 gigawatts of capacity by 2020 as part of incentive-driven efforts to fight climate change, the head of Italy´s top utility said.
GlassPrint 2011, Europe’s leading event for the decoration of flat and hollow glass, will take place from 23-24 November 2011 in Düsseldorf, Germany.
Debut Glass in Kent is one of many of Thermoseal Group’s long-term customers now supplying all of its warm edge units with Thermobar Warm Edge Spacer to meet the market demand for ‘C’ to ‘A’ rated windows.
Supplies of raw materials for IG sealant production are likely to become difficult. The leader in chemicals for secondary flat glass processing outlines the situation.
Kolbe presents a new, beveled profile for its Ultra Series Direct Set casement and awning windows. These durable, aluminum clad windows are glazed to the interior and direct set in the heavy-duty extruded aluminum frame.
In recognition of the importance of GlassPrint on the global glass event calendar, the 2011 event will be powered by glasstec – the world’s largest and most international glass trade fair.
Pompano Beach, FL April 5, 2011 Glasslam’s First New Silicone Spacer Module Arrives Glasslam has announced the arrival of its first fully inline silicone spacer module at its Pompano Beach, FL headquarters.
Walker, Mich. — Tubelite Inc. announced United Plate Glass Company (UPG) has been named as a distributor for the company’s architectural aluminum products.
Insulated glass (IG) manufacturers can now purchase aluminium, steel or Thermobar warm edge spacer bar with pre-applied PIB (Polyisobutylene) primary seal from the UK’s leading supplier of IG components, Thermoseal Group.
While participating in the warm edge silicone spacer industry for only three years, Glasslam as a manufacturer of foam spacer realized that the product and its manufacturing methods utilize 20+ year-old technologies and are far too costly and…
GIESSE North America, a subsidiary of the Giesse Group headquartered in Bologna, Italy, announced that Roger Daugherty has joined its sales team.
Over recent months, market trends for a large number of chemical raw materials have become extremely critical.
As a result of frenetic developments in the warm edge market, the most qualified producers are inevitably raising their production levels.
International motor shows are traditionally where car makers can freely unleash their creativity in order to engage the public’s attention with very innovative projects that may even be over-the-top because they cannot be mass produced, but that are…
Fresh success for the Fenzi Group in China: the new production line for polyisobutylene-based sealant (PIB), Butylver, inaugurated at the end of October 2010, is now in full swing.
Guardian Industries and Infinite Edge Technologies, LLC (IET) have signed a joint development agreement to commercialize IET’s InfiSpace™ warm-edge spacer system.
Glass and Glazing Federation (GGF) guidelines state that spacer bar can be exchanged within the scope of a registered Window Energy Rating (WER) providing it is deemed as a ‘same’ or a ‘better’ performing product.
The dates for Vitrum 2011 were announced at Glasstec last Fall. Slated for October 26th to 29th, the vitality that drives international excellence in the glass processing machinery sector will be on display for all the world to see.
A special logistics and transportation system, high-performance raw materials and outstanding know-how as a result of more than 40 years’ experience in the sector: these are the Henze-Glas secrets for designing and manufacturing the largest…
Representatives of a former Marshall business got a chilly reception Monday night as they asked the Marshall City Council not to make them pay taxes for the time they were here.
Founded in İstanbul in 1995, CMS Glass Machinery continues to design, produce, market and offer technical service for the insulating glass, glass processing machines and flat glass tempering furnaces.