Others also read
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curios” this year.
The 10th GPD conference is scheduled 15-18 June 2007. This leading forum for trendsetters and decision-makers of the glass industry has traditionally attracted an audience of some 800 and has featured some 200 professional presentations.
About 100 glass and metal companies will participate in V Fenavid - Glass and Aluminum National Fair, that will happen in September 7 to 9 at the Centro Sul Pavillon, in Florianópolis (Santa Catarina), Brazil.
Polish automotive glass supplier has found that a high-accuracy water jet cutting machine at their has enabled it to cut-out any size or shape of area easily and economically.
Italy's glass-manufacturing industry experienced a slight recovery in 2005, glass manufacturers professional association ANFAO announced in an official statement issued today.
International trade fair for window and facade fensterbau/frontale 2006, which takes place together with Holz-Handwerk in the Exhibition Centre Nuremberg from 22-25 March 2006, has two premières to offer this year.The first one is expert discussion…
EMAP Maclaren, organiser of Glassex, has announced advanced sales for the 2006 event are well ahead of the previous event year-on-year.
GlassTech Asia, the 5th International Glass Products, Glass Manufacturing, Processing & Materials Exhibition and Conference, gave Thailands and the regions glass makers convenient access to relevant glass making technology and equipment from…
Thailand Convention and Exhibition Bureau (TCEB) together with Conference & Exhibitions Management Services Pte Ltd, Singapore Glass Association and Thai Glass Dealers Association will organise GLASSTECH ASIA 2005 for the first time in…
Adelio Lattuada has presented a new model at Vitrum 2005: the A.L. 7 E Cerio, an electronic straight-line edging machine for the processing of flat edge with arris, polished by liquid cerium oxide.
Without doubt a decisive factor in VITRUM 2005 being so successful for Bystronic was the fact that Bystronic, in its role as a global supplier of total solutions for the economical, application-engineered manufacture of architectural and automotive…
The public's phenomenal response at Vitrum in Milan is testimony to Edgetech's success since its launch three years ago in the greater European economic area: in EMEA, Edgetech is growing at a rapid rate.
Sevasa, amongst the leading companies of high quality satined and engraved glass, has presented its new design CriSamar® ICE at the glass international exposition Vitrum 2005, held in Milan this past October.
With the rise of shaped glass sheets in the architectural and automotive glass market, there is a decrease of glass sheets being produced in batches.
At Vitrum: Hall 15-I, Stand J04Perfect Rack Rack Management software, integrated with Perfect Cut, reduces operative time about 1-2 hours a day, and with a waste increase of only 0,5%.
Hall 15 Stand C/04Automatic CuttingThe linea 2005 wheels are produced using a particular type of hard metal obtained by means of sintering techniques applied to small dimensioned objects.
At Vitrum: Hall 15/2, Stand C 83Tubolar pull handles with lock available in a variety of diameters, manufactured in stainless steel AISI 316L.
At Vitrum: Hall 16/1, Stand C 06 - 08Dallapiccola Dario has been manufactoring racks and trolleys for glassworks since 1994, supported by his fathers 30 years experience in mechanical fabrication.
Our company Collanti Parini s.r.l. will be at Pad. 14 - B61 of Vitrum from 5th to 8th October.We'll show Vitralit® one component, UV glue for glass, Penloc® structural, two-component adhesive, special UV lamps and coloured Vitralit® for glass.
From several years on glass market, the company FORZA G ITALIA S.r.l., producer of CENTRIFUGAL SOLID/LIQUID SEPARATOR SYSTEMS, displays at its Vitrum booth H2O Global Systems that means SYSTEM OF MICRIFILTRATION that procede part of the grinding…
At Vitrum: Hall 15/2 Stand B 68LEMA Srl is the first Company in the world, manufacturer of ovens for application of glass chemical tempering process, starting in the 1972 manufacturing equipment for tempering optical and sunglasses lenses.
At Vitrum: Hall 15/I, Stand I 13-25PLC VEGAThe Schiatti Angelo company will introduce the new graphical PLC VEGA which will replace all the electronic cards CM520.
At Vitrum: Hall 16/1, Stand C 04Due to a consistent development, EEE today is capable to introduce the newest generation of the horizontal tempering plants for flat glass VITROMOD® . The primary advantages are: 1.
Hall 15/I - Booth B25Bystronic is the global supplier of total solutions for the economical, application-engineered manufacture of architectural and automotive glass.
Olivotto industries has been working in the hollow glass sector since 1946, when it began marketing its first rotary-type glass blowing machine.