Others also read
Twenty-five years of SentryGlas® interlayer, twenty-five years of iconic architectural projects that have demonstrated the benefits of this remarkable interlayer.
After the success of the Rotary Bending System 360 at four stages and the launch of the related “making of”, RCN presents a rendering of the system.
The latest purchase by Centre Glass is the CT 2800 washing machine, positioned in line with a CNC machine.
BGT reference project - VoltAir, Berlin: weightless rooms for new work visions.
At the prestigious corner of Royal Parade in Melbourne, The Peter Doherty Institute for Infection and Immunity speaks softly yet captures attention.
Thermoseal Group’s Sales Director Mark Hickox reveals how cost cutting can be damaging – but not for the reasons you might think.
Net sales and comparable EBITA improved, markets remained challenging
As part of AYD Group Glass Industry, Wenfrod reinforces its leadership position in the industry through innovative products and sustainable business models.
Glaston Corporation’s member of the Executive Leadership Team and SVP Services, Artturi Mäki, has decided to leave the company on 30 April 2024 to pursue new opportunities outside Glaston. Mäki joined Glaston in 2016.
Glaston Corporation will publish its January–March 2024 Interim Report on Friday May 3, 2024 at around 8.30 a.m. Finnish time.
As of the beginning of April 2024, Kimmo Kuusela has been appointed Senior Vice President of Sales and Service for Asia Pacific.
For R.C.N. Solutions, the production of one rotary bending system has been a big challenge, lived intensely.
CMS taktika is the compact vertical machining center developed by CMS for the greatest flexibility in small spaces.
RCN will be present in the Italian Pavilion area offering its latest in the matter of bending, lamination and chemical tempering.
The integrity of the seal is a crucial part of insulating glass units (IGUs) and their functioning.
Another HEGLA SortJet sorting system is leaving the factory after successful acceptance.
Interested in giving your existing glass-cutting equipment a new life? Glaston CNC96 retrofit is an in-house system engineered with exclusively developed hardware components used from 1996 until 2010.
Eastman’s new PVB interlayers take dual-plane HUD and autonomous systems applications beyond expectations
Illuminated by the Finnish summer sun, Glass Performance Days 2023 was full of informative content on a wide variety of topics across the glass industry.
Cutting thick safety glass without compromising on cycle times can be quite a challenge, especially if the glass is thicker than 19mm and has a curved shape.
Mastering the tempering process has been considered a very difficult or even a mystical art form, but it should not be!
The Board of Directors of Glaston Corporation has appointed Toni Laaksonen President and CEO of Glaston Corporation.