Others also read
The company from Lleida with more than 60 years of experience in the glass sector relies once again on the latest technology from Pujol to continue with its growth strategy.
Laminated Glass Production with LiSEC Machines: Speed Assembling Mode
How high-quality insulating glass is produced with LiSEC machines in Nord Rostock.
Coating independent temperature monitoring and quality control in glass tempering furnaces
The LiSEC PlusLam is a laminated glass line equipped with sophisticated machines and sophisticated lamination technology.
The one-by-one mode is especially suitable for the series production of small glass at high speed with only one person. In addition, there is less foil waste due to the waste optimisation.
Bojar Glass in Poland has been running its Glaston FC Series tempering line without operator input since 2021. Check out how Glaston Autopilot is mastering the tempering process.
The basic mode of the LiSEC laminating glass machines! Watch the video now.
Shandong Yaohua Glass: Austrian quality enriches Chinese insulating glass market
With the machines and software solutions from LiSEC, it is possible to cover the entire process chain of flat glass processing from loading to data analysis with just one manufacturer.
Peter Pfannenstill will tell more about this on the podium during GPD Days in Tampere, Finland on June 14 - 16.
Energy efficiency is one of the key ways to make the electricity you use in production go further.
Opening up new opportunities with laminated glass
Higher production capacity with lower energy consumption
Measuring the gas concentration of insulating glasses has become more important than ever as it contributes to the energy efficiency of the insulating glass.
Glaston sees the promotion of sustainable development as an opportunity.
The latest LiSEC float cutting technology went into operation at Arbonia Glassysteme GmbH in Deggendorf in February 2023.
The agreement previews Matodi as exclusive distributor in North America of TK Srl.
The rising costs of fossil fuels, at least in big parts of the world, and a general pressure in the reduction of CO2 is driving industries of all kinds to explore and use alternative energy sources.
This blog on Glastory by Uwe Risle is covering the strategies to minimize costs in insulating glass production.
Energy-efficient buildings products such as high-performance glazing must be considered as ‘strategic net-zero technology’.
The European Parliament adopted its position on the Energy Performance of Buildings Directive (EPBD) with 343 votes in favour, 216 against and 78 abstentions.
In order to meet high quality standards, Tristar uses solutions from LiSEC
