Others also read
Since gas fill in an IGU is invisible to the eye, Sparklike's Handheld NOVA™ turns verification into traceable, unit-level documentation manufacturers can rely on for compliance and quality control.
The challenges facing the glass and glazing industry continue to evolve. From changing regulations and product safety reforms to energy efficiency targets and skills development, businesses are navigating an increasingly complex landscape.
On Chicago's former Finkl Steel site, high-performance Vitro glass helps turn 1229 W. Concord into a daylight-filled, riverfront-facing model for next-generation life sciences design.
Saint-Gobain and AGC are joining forces to deploy a world-first, large-scale hybrid electric furnace at Saint-Gobain's Avilés plant in Spain, set to cut CO₂ emissions from flat glass production by around 50%.
Glass can be recycled indefinitely, and using glass cullet in production reduces the need for virgin raw materials, energy consumption and greenhouse gas emissions.
The Fenestration and Glazing Industry Alliance (FGIA) has released an updated technical information report describing what sound is, how it is transmitted, how it is measured and how its transmission can be controlled.
VacuMax™ Vacuum Insulating Glass (VIG) by Vitro Architectural Glass uses two tempered lites of glass, a hermetic edge seal, a getter for long-term performance and nearly invisible micro-pillars to deliver exceptional thermal insulation in a slim,…
The Intelligent Raw Glass Storage System is an intelligent storage management solution designed specifically for glass processing factories.
Specification will include enamel application standards on all types of glass for quality assessment.
For the 14-story Reverb Alton Collection apartment building in Kansas City, Burns & McDonnell chose Solarban® 70 Optiblue® glass to balance daylighting, views, and thermal efficiency with the character of the historic Crossroads Art District.
Gain valuable insights from industry experts at the 2026 FGIA Fall Conference in Calgary, AB, where timely education and practical solutions will take center stage.
The 2026 edition of AAMA/WDMA 100 introduces updated best practices for window installation.
Optimize gas fill verification with the right measurement mode.
A new Glass for Europe series examines how national regulations integrate the solar factor in buildings.
Registration is now open for the Fenestration and Glazing Industry Alliance (FGIA) 2026 Western Region Virtual Summit, taking place September 30.
The Glass and Glazing Federation (GGF) is encouraging businesses across the glass and glazing industry to begin preparing for the next phase of construction product reform, following the publication of its new guidance on PAS 2000:2026.
British Glass has confirmed its leadership team following the separation of British Glass and Glass Technology Services (GTS), marking a new chapter for the organisation as it continues to represent and support the UK glass industry.
Rising 41 stories above downtown, One St. Petersburg has become a defining feature of the city's skyline and a prominent landmark along Florida's Gulf Coast.
As construction product reform continues to develop, businesses across the glass and glazing industry will have to become increasingly familiar with technical documentation.
On 17 July, the European Commission adopted its proposal for the ETS reform. Glass for Europe is currently conducted a detailed assessment of the legislative proposal. The text below is the press release which was sent following the adoption.
In the first episode of Making Quality Visible, Tim Bushaw, Group CEO, explains how LiteSentry, Softsolution, Strainoptics, and Avalon Vision Solutions are combining their strengths to shape the future of quality inspection in the glass and plastics…
Several opportunities for hands-on industry experience and learning will be offered during the 2026 FGIA Fall Conference in Calgary, AB.
Industry volunteers led hands-on glass cutting and mirror design for high school girls exploring careers in construction trades
NGA calls on representatives from glass fabricators and manufacturers to participate in the PCR guidance development process
Over 100 glass industry technical leaders gathered in Chicago in June for the NGA Glass Conference track at the NGA Glass Fabricator Conference (GFAB), hosted by the National Glass Association.