Others also read
The most modern control technology is used in the ZeroCO2Glas test furnace. Horn software engineers create the control system with individually adapted process screens.
The Ain Sokhna float plant in Egypt will see its capacity increased with the construction of a second flat glass production line.
Thermoseal Group’s Sales Director Mark Hickox reveals how cost cutting can be damaging – but not for the reasons you might think.
The workshop will take place May 16-17, 2024, at the Hyatt Pittsburgh International Hotel in Pittsburgh.
On 16 April, Glass for Europe participated in a workshop on the “Extended Producer Responsibility in the Construction Sector” organised by the Buildings Performance Institute Europe (BPIE).
For R.C.N. Solutions, the production of one rotary bending system has been a big challenge, lived intensely.
Vitro Architectural Glass achieves Top 20% LEC rating with updated EPDs.
CMS taktika is the compact vertical machining center developed by CMS for the greatest flexibility in small spaces.
It is well known that climate change refers both to long-term natural and man’s hand shifts in temperatures and weather patterns.
The integrity of the seal is a crucial part of insulating glass units (IGUs) and their functioning.
Another HEGLA SortJet sorting system is leaving the factory after successful acceptance.
Interested in giving your existing glass-cutting equipment a new life? Glaston CNC96 retrofit is an in-house system engineered with exclusively developed hardware components used from 1996 until 2010.
Illuminated by the Finnish summer sun, Glass Performance Days 2023 was full of informative content on a wide variety of topics across the glass industry.
Diageo's seed investment in Glass Futures' expansion highlights its commitment to new tech and partnerships for its 2030 ESG goals.
Cutting thick safety glass without compromising on cycle times can be quite a challenge, especially if the glass is thicker than 19mm and has a curved shape.
In addition to the five-part video series, Glass for Europe is thrilled to unveil a two-pager Manifesto outlining its priorities and policy recommendations for the 2024-2029 mandate of the European institutions.
Mastering the tempering process has been considered a very difficult or even a mystical art form, but it should not be!
Glaston is spreading the word about using glass to build a better tomorrow. This video is a short overview of our complete offering in glass processing.
On 20 March 2024, Glass for Europe held its annual General Assembly in Brussels, bringing together senior executives and committee chairs from EU-based float manufacturers.
On the Global Recycling Day (18 March), Glass for Europe launched a new webpage dedicated to flat glass recycling.
POLFLAM is thrilled to announce the receipt of an Environmental Product Declaration (EPD) for its monolithic fire-resistant glass product range in fire resistance ratings EI and EW.
The agenda at glasstec 2024 features topics that keep the glass industry busy: Decarbonisation, Circular economy and Digital technologies. From 22 to 25 October these Hot Topics will be in focus.
Integration of the latest technology of a PNM in an existing Lamination Line
Glass for Europe is pleased to observe that the EC has acknowledged glass as an example of a material for which research and innovation must be supported to enable greater wellbeing in buildings.
The plenary session of the European Parliament has voted in favor of the recast Energy Performance of Buildings Directive, one of the final texts of the ‘Fit for 55’ package.