News from the leader in transparent conductive LED Film Supplier

SUN-TEC Swiss United TechnologiesWe would like to thank all interested Partners and customers, which have visited SUN-TEC Co.

Ltd. on the booth shared with Bridgestone (EVASafe) at Glassbuild Atlanta, in October 2009.

SUN-TEC presented transparent conductive LED films which may be laminated with EVASafe, TPU and PVB as well. The films may reach a size of 1250 x 3500 mm with nearly as many LEDs as wished by the customers. SUN-TEC is always realizing customer LED designs. 

Most of the customers in the architectural area are strongly interested to define precisely the design and the quality of light to emmit from LED Glasses. The picture below is showing warm white LEDs (3300 K) as well as cold white LEDs (6000 - 9000 K).  SUN-TEC will respect these type of wishes as well.

Many of the requests did focuss on separatly controlled LEDs for big display type applications like video glass facades. We are now working on modular micro controllers which can be assigned to any glass panel in terms of 3 channel per controller modules. Each 3 channels allowing to assign a LED group to "be" a pixel. This way glass windows with 100 RGB LEDs per per square meters may be segmented as 1, 2, 4 , 6, 8 - 100 pixels. The price for the LED film will stay constant, and the price of the programmable RGB controller will encrease as a function of requested separatly controlled pixels.

Daniel Shavit, www.sun-tec.ch, +4141 740 01 73 T, skype: sun-tec

600450 News from the leader in transparent conductive LED Film Supplier glassonweb.com
Date: 6 October 2009
Source: Dr. Daniel Shavit, SUN-TEC

See more news about:

See more from these topics:

Others also read

AGA hospital is the largest hospital in The Hague, in The Netherlands. Renovated and enlarged with the addition of a new, modern building, it has been further enlarged at the end of 2017.
Two solutions to reduce the problem of noise diffusion in the office: the sound-absorbing walls.
Gulfstream Condominiums on North Padre Island, near Corpus Christi, Texas/USA.
Laminators know it too well: laminating nipping is a critical phase of the glass laminating process because improperly set and inadequately controlled parameters will cause air-related and sometimes irreparable defects in the laminate.
Gone are the days when media facades were exclusive to the West. Over the past few years, this beautiful lighting concept has taken baby steps and is gradually gaining popularity in India.
Turnover growth, plant enlargements and new recruitments.

From industry

Schaliënhoevedreef 20-D,
2800 Mechelen
Belgium

Da Vincilaan 1,
1935 Zaventem
Belgium

Add new comment