Latest articles
| Fenzi S.P.A. improves the resistance of the Thiover line
| New technologies for glass finishing and processing make for high production efficiency and create the prerequisites for forward-looking products.
| Last week Safety Glass Experts signed a service contract with Romanian safety glass producer Gerom S.A. Buzau.
| In both the construction of new buildings and the refurbishment of existing ones there is an increasing trend towards construction materials with the highest possible energy efficiency.
| Instant privacy at the flick of a switch. This is what a switchable privacy glass offers.
| Benefits of the tempered glazing are well known and the tempered glazing is being utilized more and more in many different applications. Manufacturing technology in this area of safety glazing is developing fast.
| Large bus and special vehicle windscreens are produced with gravity bending method. Producing successfully this largest segment of vehicle glazing requires not just suitable equipment, but advanced skills, know-how, knowledge, and quality tooling,…
| PVB is increasingly assuming the leading role among alternative encapsulation materials for solar cells as the alternatives to Ethylene-Vinyl-Acetate (EVA)
| Atomic Layer Deposition is a Chemical Vapor Deposition method based on saturating surface reactions.
| The article written by Mr. László Vákár and presented at the GPD 2009.Air pollution is high on the political agenda worldwide. Emissions have to be reduced.
| The progress obtained so far, and the future trends for the two most successful thin film solar cells, namely CulnGaSe2/CdS and CdTe/CdS, are described in this article.
| Process control is a key factor for speed and efficiency of IS machines. To run a machine at high performance levels it is essential to achieve and maintain stable production conditions.
| Forehearth operation is simple – you just set the temperatures you need on the zone controllers and away you go. In fact, it is so easy that the production department can attend to it alongside their real job of running the machine.
| Wrightstyle Limited is one of the UK’s most innovative steel glazing specialists with an international client base. Lee Coates, the company’s technical manager, explains the mechanics of fire and fire safety.
| During the past 15 years tempering of bent glass has mainly changed to horizontal methods.
| When new installations of flat tempering machines suited for architectural glass are discussed today, the option of convection technology is certain to be raised.
| The oscillating horizontal tempering furnace developed in the 1970s has been one of the most significant innovations of recent decades, above all commercially.
| Glass stairs have become increasingly common during the last few years. This is partly due to architectural fashion, but, mainly, it is a result of considerable improvements that have been made in reference to the strength of glass used for…
| Insulating glass panes of 5.0 x 2.3 m made of twice-laminated glass 16 mm thick and weighing about 925 kg had to be installed at a height of up to 45 meters as well as 18 mm thick enamelled special glass plates for the tower facing - and this in the…
| Glass is a versatile material. Especially large area applications such as facade solutions impart their own visual effect and therefore require a targeted selection of the appropriate product.