This two component epoxy is ideal for high performance bonding, sealing, coating, and encapsulating applications in the electronic, electrical, computer, metalworking, optical, electro-optical and oil/chemical processing industries. Its lower exotherm also makes it ideal for casting and potting in cross section thicknesses of over one inch.Serviceable over the wide temperature range of -100ºF to above +250ºF, EP30D-7 is designed to cure at room temperature or more rapidly at elevated temperatures with minimal shrinkage. This system is 100% reactive and contains no solvents or diluents. The cured elastomer is an excellent electrical insulator. It also resists thermal cycling well and stands up to a variety of chemicals.EP30D-7 has an impressive tensile strength of greater than 1,600 psi, a Shore A hardness of 90, an elongation of more than 40%, and a dielectric constant exceeding 400 volts/mil. It is resistant to thermal cycling and chemicals including water, fuels, and inorganic solvents even at high temperatures. It is available for use in pint, quart, gallon, and 5 gallon containers kits.Master Bond Flexibilized & Toughened Epoxy SystemsMaster Bond Polymer System EP30D-7 is intended for high performance, abrasion resistant applications. Read more about Master Bond’s flexibilized and toughened epoxies at http://www.masterbond.com/lp/tabs/tp_pp_flextoughened.html or contact Technical Support.Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: firstname.lastname@example.org.
James Brenner, Marketing Manager
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922