K2 and Glazerite refit is top of the class

Though VEKA profiles had been specified for the original install, the contractor had instead used another system. This had resulted in bowed sashes and inoperative windows, as well as window screen walling which shook when pressed.

As one of the North West’s leading commercial installers, Wirral-based K2 has worked extensively on new build and replacement projects, ranging from retail units and offices to schools and hospitals. Having fitted another local primary with a similar specification, contractors called on them to refit the Winsford-based school, this time using the trusted VEKA product.

Together with leading VEKA fabricator Glazerite, K2 attended the school to find out what problems they were having and what was required to put the job right.

Liam Bird, Commercial Manager for K2, explains: “Once we’d carried out our onsite survey, it was obvious the windows used in the install were so badly bowed they wouldn’t close, and the window system had no reinforcement in them at all. “

We made the correct calculations around wind loads, checked the dimensions, and, in line with VEKA and Glazerite’s technical expertise, we made the changes necessary to ensure the new install worked how it should and would perform for years to come.”

Over a three-week period in the summer of 2018, K2 installed 47 VEKA M70 frames in non-grained Grey, alongside matching commercial-grade aluminium doors.

Glazerite’s Sales Manager, Peter Smith, says: “The windows we fabricated for K2 were fully steel reinforced. The window screens were also coupled together with suitable frame connectors with the correct ‘EI value’, in order to withstand the calculated forces.” He adds: “VEKA’s technical expertise is second to none and K2’s installations are always exceptional. As a fabricator, we don’t cut corners, and together with K2 and VEKA, we ensured that the school got the correct products, which were well made and installed professionally and efficiently.”

Peter adds: “The uPVC waste from the original job was also managed efficiently with the frames being taken by VEKA Recycling to their facility in Wellingborough. There, waste products are sorted and granulated for reuse in new windows and other uPVC products.”