High Performance, UV Curable Epoxy with Enhanced Chemical Resistance

Combining superior physical strength and fast cure rates, Master Bond UV16 is formulated for demanding bonding, sealing, and coating applications.

It is a one component, no mix system and cures in one minute or less at room temperature with commercial UV light sources.

This 100% reactive epoxy is uninhibited by oxygen and does not release any solvents or volatiles during the curing process. UV16 will cure in thicknesses up to 0.125 inches and has a 2% to 3% shrinkage rate, which is substantially lower than most free radical UV adhesives. Once cured, it delivers a tensile strength exceeding 4,100 psi and a Shore D hardness over 75. Post-curing UV16 at 90° to 125°C for 30 minutes gives the adhesive a glass transition temperature of 135°C and enhances its chemical resistance.

UV16 offers superior chemical resistance, especially against acids and solvents. After a three month immersion in 20% sulfuric acid, it exhibited less than a 3% weight gain. UV16 had a weight gain of less than 2% when immersed in 90% isopropyl alcohol for the same amount of time. With a volume resistivity of 1.6x109 megohm-cm, this epoxy also features excellent electrical insulation properties up to 300°F.

Master Bond UV16 has a viscosity of 200 to 400 cps and adheres well to a wide array of substrates, including plastics, glass, and many metals. A higher viscosity version called UV16TK is also available. UV16 has a 6 month shelf life in unopened containers and is available in syringes, half-pints, pints, quarts, gallons, and 5 gallon pails.

Master Bond Chemically Resistant Adhesives

With demanding bonding, sealing, and coating applications in mind, easy-to-use Master Bond UV16 produces tough, chemically resistant bonds that cure quickly upon exposure to UV light. Read more about Master Bond's chemically resistant epoxies at http://www.masterbond.com/properties/chemical-resistance or contact Master Bond's Technical Support Team by phone at +1-201-343-8983, by fax at +1-201-343-2132 or by e-mail at techinfo@masterbond.com.

CONTACT:

James Brenner, Marketing Manager

Email: jbrenner@masterbond.com

Tel: 201-343-8983

Fax: 201-343-2132

MASTER BOND INC.

154 Hobart Street

Hackensack, NJ 07601-3922

Web: www.masterbond.com

600450 High Performance, UV Curable Epoxy with Enhanced Chemical Resistance glassonweb.com

See more news about:

Others also read

Here you can find out more about tremco illbruck's presence at the BAU 2019!
Clippers Quay is an ambitious development rejuvenating Salford’s historic docks with a little help from silicone, tape and sealant specialists tremco illbruck.
Two exclusive foreign distributors, Holdfast NZ Ltd. in New Zealand and Joints Oy in Finland, will enable Soudal to grow locally.
Dow High Performance Building will exhibit and present at GlassCon Global in Chicago, Illinois, on September 5 through 7.
CFO promoted internally. Daniel Johnson has been the new Chief Financial Officer (CFO) of the tremco illbruck Group since 1 January 2018.
Transparent Nanotech Coating Blocks 99.9% of UV-A and UV-B Transmission to 400nm.

From industry

Portuetxe bidea 18
20018 San Sebastián (Gipuzkoa) Guipúzcoa
Spain

NEWS RELATED PRODUCTS

Add new comment