Dimensionally Stable Epoxy Based UV Curable System with High Temperature Resistance

With its outstanding light transmission properties and optical clarity, Master Bond UV15 is widely used for a variety of bonding, coating and sealing applications in the optical, electronic and optoelectronic industries.

This epoxy based UV curable system is 100% reactive and does not contain any solvents or other volatiles. It is also completely free of any oxygen inhibition.

Like most UV systems, Master Bond UV15 will cure quickly and easily when exposed to a UV light source with a wavelength range between 320-365 nm. It typically cures in thicknesses of a few microns to 0.015-0.020 inches in 15-30 seconds or less. UV15 cures by a cationic reaction and produces bonds that have lower shrinkage (1-2%) and higher temperature resistance than most UV systems. Its glass transition temperature (Tg) is 90-95°C with a straight UV cure. When post cured for 30 minutes at 125°C, the Tg is 125-130°C. The service temperature range for this system is -80°F to +350°F.

UV15 has excellent resistance to a wide variety of chemicals including water, acids, bases, fuels and many solvents. It features superb physical strength characteristics and electrical insulation properties. UV15’s low viscosity allows it to be spin coated. It has superior adhesion to a wide variety of substrates including plastics, glass and many metals. UV15 is available in syringes, ½ pints, pints, quarts, gallons and 5 gallon containers.

 Master Bond Electrically Insulative Adhesives

Featuring high dielectric strength, low dielectric constants and high volume resistivity Master Bond UV15 offers superior electrical insulation properties. Read more about Master Bond’s electrically insulative epoxies at http://www.masterbond.com/properties/electrically-insulative-adhesive-systems or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: technical@masterbond.com.

CONTACT:

James Brenner, Marketing Manager

Email: jbrenner@masterbond.com

Tel: +1-201-343-8983

Fax: +1-201-343-2132

MASTER BOND INC.

154 Hobart Street

Hackensack, NJ 07601-3922

Web: www.masterbond.com

600450 Dimensionally Stable Epoxy Based UV Curable System with High Temperature Resistance glassonweb.com

See more news about:

Others also read

Ben Alcock
Ben Alcock, Business Development Manager at sealant, adhesive and tape specialists illbruck, explains why impregnated tape is the future of window installation.
Charlie Luxton builds a house with a little help from TP650
Architectural designer-turned-TV presenter Charlie Luxton is building a house in collaboration with Home Building and Renovating magazine – and he’s using illbruck’s state-of-the-art TP650 Trio installation tape to fit the windows and doors.
Dow High Performance Building Inspires New Possibilities in Sustainable Construction
New DOWSIL™ brand to be featured at AIA Conference on Architecture.
Technology Centre in Traunreut: Dynamic – and still growing
On 12 April 2018, tremco illbruck CEO Reiner Eisenhut put the new production facility for sealants and adhesives into commission in a ceremony at the company’s site in the town of Traunreut in Upper Bavaria.
Rick Montani named President and CEO, Sika Corporation
Richard (Rick) Montani has been named President and CEO of Sika Corporation (USA), effective January 1, 2018.
Formator: Structural Solutions with Dow Corning® TSSA Technology
Formator introduces a new product called TSSA® bonding technology.

From industry

Portuetxe bidea 18
20018 San Sebastián (Gipuzkoa) Guipúzcoa
Spain

NEWS RELATED PRODUCTS

Add new comment