Topics regarding quality of glass, its processing and its application in building.
We are steel makers and we need to replace glass in our control rooms that operate furnaces.
Preferable a supplier within UK.
Any suggestions?
I have a job that requires me to fit glass to an area 5450mm height by 4000mm width. My clients specs are that they want but joint and it must be laminated safety glass. Can anyone shed some light on what they would do in installing this glass. the framework will be aluminium shopfront and i want to use 8.38mm pvb glass.
There is a "Glass defects manual" for products which are produced by IS Machines.You are kindly requested to inform me if is there similar handbook for Glass Table ware products which are produced by Press Machines?"
I look forward to your kind attention.
keshavarz.saeed@gmail.com
We are currently looking for a manufacturer of our heated windscreens mainly cars, small ammount of commercial screens.
looking for mirror manufacturer in Germany, any one know about it?
Do any one knows the cost of the self cleaning glass? What is the cost different between the self cleaning glass and the normal float glass?
Upon installation how much would it helps to reduce the cost of glass cleaning and maintainances?
Would anyone be able to help me estimate the size of the Glass repair market in the UK and Europe?
I am currently busy with the construction of a large aquarium of 5000 litres,Having done this before with another aquarium i have witnessed in most aquariums using laminated glass that over some time the glass begins to delaminate in 3 different ways along the edge, it either get small finger like projections that look like clear glue or it get an air bubble which forms and gets squeezed due to changes in the pressure and looks almost like a crack and lastly it begins to absorb moisture into the laminate with water condensation forming in it.
Is there a minium/maximum width for silicon joint in butt jointed glass ??
Project glass support steelwork has theoretical mid span deflection of 21mm over 9000mm span after the glass is installed (ie: due to live loads)and floor is occupied. If we use standard 6-10mm joints then there is a danger that the glass joint will pinch at top of joint. Any ideas to deal with the this potential issue ?
Logikman
For our building project we have purchased several laminated glass panes. After I while we have noticed that glass is like separating. I contacted my distributor and he will check it out. However I would like to know whether this problem can be fixed, or the replacement of the glass is necessary?
