Strategic Partnership: Thai Glass Industries & XPAR Vision

Thai Glass Industries (TGI), container glass manufacturing subsidiary of Berli Jucker in Thailand, and XPAR Vision from the Netherlands, join forces in a strategic partnership, providing leading Hot End sensor technology to the global container glass industry.

The partnership is the crown on the co-operation, which started two years ago.The collaboration of the two companies began with an extensive trial with the XPAR Vision InfraRed Dual (IR-D) camera. The trial was executed at the TMG production facility at Saraburi. With the IR-D camera system all bottles are inspected in real time, to detect critical defects. Rejected bottles are removed immediately, still in the hot end phase. Process information on cavity levels allows any operator to act quickly on any form of process deviation. Once the trial was evaluated positively, it was followed by another trial, this time with the XPAR Vision Infrared Gob weight Control system (ICG), that automatically keeps the weights of gobs on a constant level.

Thumbs up: a satisfied Mr. Somporn!



Mr. Somporn, Vice President Operations at Saraburi explains: “Implementing Hot End technology allows us to take a very important step, to control our forming process performance on the highest possible level. This is a necessity, to reach better performance in both efficiency and product quality, in order to meet increasing customer demands.”




Mr. Boonsak, Senior Vice president Operations at TGI adds: “We choose XPAR Vision as our partner, for their long experience in developing and implementing Hot End sensor technologies and their irrevocable commitment to assist us starting using these technologies. Having a nice system is one thing, making good use of that system is another thing. During the last few years XPAR Vision has shown dedication to our success.”




As part of the strategic partnership, throughout the coming years more systems will be introduced at Saraburi factory. “It is our dedication to maintain to be the leading container glass manufacturer in South East Asia. Therefore we simply need this type of technology”, Mr. Boonsak concludes.




“We are proud that Thai Glass Industries, being a leading container glass manufacturer in Thailand, has chosen our InfraRed technology to be the standard” says Paul Schreuders, CEO of XPAR Vision. “With their commitment we start to have a real base here in South East Asia. Together we can optimize the glass production process, in order to realize maximum quality glass containers, with minimum quantity of raw materials, energy and CO2 emission.”


600450 Strategic Partnership: Thai Glass Industries & XPAR Vision

See more news about:

Others also read

Opening Ceremony (from left: Supattanapong Punmeechaow (President & CEO, GC); Masaaki Ito (President, Kuraray); Masahiro Fujita (Representative Director, Executive Vice President, Sumitomo))
Kuraray Co., Ltd., PTT Global Chemical Public Company Ltd. and Sumitomo Corporation on July 11, 2018, held an opening ceremony for a joint venture company, Kuraray GC Advanced Materials Co., Ltd. in Thailand.
Rijkswaterstaat and SEAC launch the National Consortium “PV in the Infrastructure”
The spatial infrastructure in the Netherlands (roads, dikes, roadsides, noise barriers, landfill sites, railway area, etc.) offers a large potential area for the roll-out of solar energy.
SEAC: Aesthetic styling of colored thin film PV façades
From the first of January 2020 onwards, all new buildings in the Netherlands need to meet the so called  “Near Zero Energy Buildings” regulation.
The first sensory perception when entering the production hall: amazingly high degree of cleanliness, bright yellow machinery (combined with subtle gray) and the hiss of LiSEC shuttles that accelerate
HG-glas is a pioneer in glass processing for system wall construction, shower doors and glass trade (including glass for furniture elements) and relies on LiSEC technology.
Raising our glasses to the glass industry!
Glass is a popular and indispensable packaging material for food and beverages of all kinds. Current product trends and innovations in production will be presented by manufacturers at glasstec 2018 in Düsseldorf from 23 to 26 October 2018.
British Glass member hosts BEIS to talk energy policy future
Once again the Department for Business, Energy and Industrial Strategy (BEIS) has been to see glass manufacturing in action.

Add new comment