Furthermore, it makes a real contribution towards conserving resources and protecting the climate. Windows and facades, in particular, are a common source of heat loss. To reduce this heat loss, it is important not only to use multi-pane glazing but also to ensure that the window frames are well insulated.
Large windows that flood the room with light are highly fashionable at the moment, particularly in public buildings. The frames are therefore becoming smaller, yet they must still offer correspondingly high rigidity and dimensional stability. To comply with all these requirements, Bayer MaterialScience has developed an efficient, robust and durable material solution based on fiber composites with a tailored polyurethane matrix.
Bayer MaterialScience has developed an efficient, robust and durable material solu-tion for heat-insulating yet small window frames. It is based on polyurethanes. This makes it possible to manufacture profiles with a very narrow visible height and low installation depth, for example for the glazing for roofs or elements where space is limited. The picture shows a detail of a lift-and-slide door from Internorm company.
“These composites are noted for their very good thermal insulation,” explains Dr. Andreas Hoffmann, head of the project in the Europe, Middle East and Africa region. It has a low thermal conductivity similar to that of wood and polyvinyl chloride (PVC). “In favorable cases, the window frames satisfy the requirements of energy-saving regulations and passive house standards,” says Hoffmann.
Excellent strength and dimensional stability
The material’s outstanding mechanical properties are attributable primarily to the high glass fiber content of around 80 percent by weight. This makes it possible to manufacture profiles with a very narrow visible height and low installation depth, for example for the glazing for roofs or elements where space is limited, like sliding doors for balconies and terraces. A heat-insulating lift-and-slide door of Internorm International GmbH is a current example. Thanks to a ground sill with a height of only four centimeters and a small framework construction the door has a huge glass facade and floods the room with light.
Alternatively, large profiles can also be produced for particularly large glass facade windows. The good mechanical properties also help to reduce overall weight. This facilitates assembly and later opening of the window elements.
The composite materials are protected from the weather by a suitable coating or by the application of a laminating film. This eliminates any risk of rotting as in the case of a wooden frame or of embrittlement as with PVC. Thanks to the material’s good dimensional stability, only minor stresses occur at the joint between the glass and the window frame when subjected to marked changes of temperature. The joint remains permanently air-tight.
Continuous production by pultrusion
The fiber-reinforced profiles are produced by a continuous process known as pultrusion. This involves pulling rovings of e.g. glass or carbon fibers from rolls through a closed injection box, where they are impregnated by the liquid polyurethane matrix. Under the influence of heat, the fiber composite is formed and fully cured in the die – in this case, a window profile. It is then cut to size by a saw.
Finally, the parts – possibly after further machining by grinding, milling or drilling – are integrated into the window or facade elements. Working with polyurethane systems generally enables higher production speeds than with alternative matrix materials such as polyester, vinyl esters or epoxy resins.
Further potential applications from transport to wind power
The possibilities for polyurethane pultrudates do not end with their use in windows and facades, however. Highly promising applications also exist in the transport sector, where, compared with metal, they exhibit very good mechanical properties and lower weight. Other examples include infrastructure projects such as bridge construction and utility poles. Because of their high breaking resistance and wear resistance, U-shaped sections made from pultrudate are used for the construction of industrial facilities.
Bayer MaterialScience will showcase a glass fiber-reinforced rotor blade for a wind turbine at the K 2013 plastics fair. In this case, the special polyurethane resin developed by the company for this application is processed using the vacuum infusion process.
About Bayer MaterialScience:
With 2012 sales of EUR 11.5 billion, Bayer MaterialScience is among the world’s largest polymer companies. Business activities are focused on the manufacture of high-tech polymer materials and the development of innovative solutions for products used in many areas of daily life. The main segments served are the automotive, electrical and electronics, construction and the sports and leisure industries. At the end of 2012, Bayer MaterialScience had 30 production sites and employed approximately 14,500 people around the globe. Bayer MaterialScience is a Bayer Group company.
This news release is available for download from the Bayer MaterialScience press server at www.press.bayerbms.com. A photo is available there for download as well. Please mind the source of the picture.
The company plans to exhibit these developments at K 2013 in Düsseldorf from October 16 to 23, 2013.
Further information on Bayer MaterialScience’s participation at the trade fair (Hall 6, Stand A 75), can be found at www.materialscience.bayer.com/en/K-Fair/Overview.aspx.
Find more information at www.materialscience.bayer.com.