Others also read

American Insulated Glass Opening New Location in Birmingham

AIG positioned to be the only full-service glass fabricator in this market.

OROShazaGLAS deals with three customer segments: automotive, industrial applications and facade engineering.

LiSEC eliminates bottleneck in production: new laminating plant at OROShazaGLAS

OROShazaGLAS‘ last investment was a LiSEC laminating plant.

Cold bending makes it possible to place curvatures on glass immediately before installation. (Photo credit: Lisec Austria GmbH)

Glass off the roll

Thin glass is revolutionising the performance spectrum of glass and glass panes.

LiSEC SprintCut is the fastest cutting table for flat glass

LiSEC - Fast, faster, SprintCut

LiSEC set itself the target of developing the most efficient cutting table for flat glass.

Automatic gantry crane facility for unstacking and rotating of freshly sealed insulating glass units with thermoplastic spacers.

LiSEC revolutionizes handling system of IGUs with new logistics solution

LiSEC handling system of insulating glass units consisting of a gantry crane facility (UTS-B) and a mobile unit buffer (MEB-B).

Manuel Aliaga is Astiglass’ General Manager. His sister Maria Jesus is responsible for the Financial Management.

Astiglass: For our future, we count on Lisec

Astiglass chose LiSEC not only because of the well-known technology and quality, but also because of the good cooperation and the technical service.

GLASTRONiC, a subsidiary of the LiSEC Group, opens the new production hall

Gábor Németh (Deputy Mayor of Oroszlány) Adam Jüllich (CEO Jüllich Holding), Othmar Sailer (CEO LiSEC Group) and Bernhard Scheidl (Managing Director GLASTRONiC) jointly inaugurated the new production hall.

High speed and high-tech for fastest cycle times and perfect quality – the Velocity Plus has two spacer applicators that apply the spacers onto the glass sheet free from tension with the highest precision and quality.

The World’s fastest Insulating Glass Line comes from LiSEC

The world market leader in plant and software for the machining and processing of flat glass from Lower Austria presents news from the Business Unit Insulating Glass: Velocity and Velocity Plus.

During the factory tour of Schollglas, the attendees were able to experience the LiSEC TPA-line in operation. They were accompanied by Mr. Weidemann and Dr. Ostendarp.

LiSEC Technology Days 2017

This year, the technology days were held in Isernhagen near Hannover on June 20th and 21st under the motto „Solutions that fit“.

The new machine design was presented to the public for the first time at the glasstec 2016. The presentations of the TPA-line were a magnet for visitors.

Outstanding Brand Leadership - LiSEC won at the German Brand Award 2017

LiSEC is not only “best in glass processing“ but also “best in brand leadership“.

The 700m² big building includes office rooms and a warehouse for spare parts and small too

LiSEC established new office building in Poland

After one year construction time, LiSEC established a new 700m² big building in Poland on June 8th.

At the site Dugo Selo, 200 employees generate a turnover of around 60 million Euros, a third of which is based on export.

KFK is on the move – with LiSEC

Lisec Sells Fabrication Machinery and Software to Croatia-based KFK.

Neil Tomlinson, UA Glass’ owner about LiSEC: “I appreciate the brilliant service for machinery and software and the ease of communication.”

DOS done, LiSEC in.

UA Glass bought not only a Fit Line for IG units from LiSEC, but also invested in software, namely LiSEC GPS.order and GPS.prod for the office.

Karol Mielnik, Managing Director of LiSEC Poland and Andrzej Gołembiecki, Production Manager Insulated Glass in the production site near Cracow.

LiSEC is part of Oknoplast’s future

Oknoplast has developed its growth strategy: their target is to double production capacity by 2020. Necessary investments are being discussed right now – obviously, LiSEC is part of Oknoplast’s future.

At Gasperlmair glass cutting is only happening with cut protection clothing

LiSEC Software leads to success

With LiSEC software for flat glass processing companies it is possible to save a lot of time and money. A case study: the company Glas Gasperlmair in Austria.

Klaes on LiSEC booth at glasstec exhibition

At the glasstec show LiSEC and Klaes have presented their joint Industry 4.0 solution.

At the glasstec the crowd of people interested in the exhibited TPA line with Fast Lane concept (vertical Lift-over System) was enormous.

LiSEC presents the new TPA line with its Fast Lane concept

Lisec has developed an entirely new concept for the production of insulating glass units with thermoplastic spacers.

Othmar Sailer, CEO of the LiSEC group, and Horst Schraml General Manager of Schraml Glastechnik GmbH and Head of the business unit glass processing, after signing the contract.

LiSEC takes over Schraml

LiSEC has taken over one hundred percent of Schraml Glastechnik GmbH domiciled in Großraming, Austria.

General Managers of Glastronic: Dr. Anita Panowitz (Administration, Production, IT) and Bernhard Scheidl (Purchasing, Sales, Engineering)

LiSEC takes over Glastronic (Hungary) and is massively expanding its business with used machines

LiSEC has taken over one hundred percent of Glastronic, a part of the Jüllich Group. The contract was concluded on September 1st.

Thanks to LiSEC equipment, there is no manual handling of glass sheets any more at Pavle.

LiSEC: Serbia’s No. 1

Pavle is a Serbian family-run glass processing company located in Pancevo, an industrial city some twenty kilometers north-east of Belgrade.

LiSEC hits at the glasstec 2016

LiSEC shows its hits at the glasstec 2016.

The thermoplastic spacer TPS is automatically applied to the glass right from a drum as part of glazing unit production

Efficient workflow: automation and digitisation reduce production and handling costs

Cost cutting, it is often said, is difficult in glass production and processing as this sector is characterised by manual processes.

Lisec bender boosts SWISSPACER sales at Olympic Glass

Leading sealed unit manufacturer Olympic Glass has seen sales of SWISSPACER grow thanks to its new Lisec bender. The Kent-based manufacturer invested recently in Lisec’s high-productivity bender to automate SWISSPACER production and improve…

LiSEC opens the new Service and Training Center in Seitenstetten / Austria

In 2016, the LiSEC service and training teams have moved into a new building, which was officially opened on April 29th.

Processing Machines – Top Priority at LiSEC

LiSEC, the world market leader in terms of plants and software for the processing of flat glass achieves a long-term success with plants for the processing. According to schedule, the Austrian plant manufacturer shall deliver the 500th processing…