Others also read
The course organized by the Fenzi group and entitled: Selecting Insulating Glass Sealants for Durability and Energy Efficiency – is now available from the AEC Daily’s Online Learning Center (OLC) website.
The factory in Harlow is buzzing as we put together the machinery, new developments and existing products alike, that will be exhibited at the Glasstec exhibition in Dusseldorf during October the 23-26th.
One of Birmingham’s most prominent Grade A office buildings is undergoing a major window replacement project.
Smart-Builder is returning to Glasstec with the latest version of their award-winning software, which makes it easier to sell glass and glass related products.
With the rising demand for narrower spacer tubes for triple glazed units, leading UK Component Supplier Thermoseal Group has introduced two new sizes to its Thermobar warm edge spacer range - 7.5mm and 9.5mm.
The manufacturing site inaugurated by the Glass Alliance network two years ago at Lipetsk, near Moscow, is running at full capacity.
As one of the most promising markets in South America for sure Brazil is in the focus of the glass industry and its machinery manufacturers.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
If further proof was needed of the thermal insulation and physical qualities of Wicona’s aluminium windows and doors, this is it.
22.05.2012 - Sustainability – i.e. balancing and integrating economic, ecological and social objectives – is a term which until now had only been used relatively rarely in conjunction with the glass machinery industry – one of the most energy-…
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
October 2004: At glasstec, A+W and HEGLA present to the expert public the first SortJet controlled by the dynamic, online optimisation system DynOpt.
May 16 - 19, 2012At Glass South America 2012 Bystronic glass will inform about its innovative system solutions for modern glass processing and shows equipment for glass handling.
Advanced solar control glass for Single Glazing ApplicationSGG Evo is a solar control glass that is energy efficient and has thermal insulation properties in a single glazing application.
SCHOTT supplies restoration glass for the Palace of Tears in BerlinMainz, May 02, 2012 – Special glass from SCHOTT gives the Palace of Tears at the Friedrichstraße train station in Berlin that is listed as a historic building a glass façade that…
The renowned window manufacturer Internorm uses Lisec Systems to increase its already extensive manufacturing capabilities.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
Perma Led adhesive Lead strip, having been manufactured for over 30 years has now been rebranded to fit in with Thermoseal Group’s own-manufactured product range.
NEW Thermobar warm edge spacer tube has been an unprecedented success. With production levels up to full capacity within three months of its launch into the UK market, its innovators, Thermoseal Group have now purchased additional machinery to…
In response to customer demand, New Irish Oak Georgian bar and bespoke cruciform fittings have been developed by Thermoseal Group in popular sizes 18x8mm and 25x8mm.
The Combi-Cross Georgian Cruciform from Thermoseal Group is the cost-effective solution to meeting an array of bi-colour and single-colour Georgian requirements, and allows sealed unit manufacturers to keep stock of Cruciforms to a minimum.
Introducing Rohit Kale - a Materials Specialist working with Thermoseal Group in conjunction with a UK university to develop the Group’s thermally efficient product range.
Spurred by customer demand, Thermoseal Group - manufacturer of Thermobar warm edge spacer tube and supplier of IG components and glass machinery - now offers to bend Thermobar into curves and arches.
Developed for rigorous bonding and sealing in demanding manufacturing applications, Master Bond EP3HTSMED epoxy system features a rapid cure schedule and a tensile shear strength exceeding 1,000 psi.
New product helps building owners cost-effectively retrofit aging commercial buildingsPedricktown, N.