Others also read
Washington, DC --- June 11, 2012 – The International Window Film Association (IWFA), a nonprofit group, announced a landmark vote by the California Energy Commission placing Window Film, a polymer material offering energy efficiency advantages, into…
The manufacturing site inaugurated by the Glass Alliance network two years ago at Lipetsk, near Moscow, is running at full capacity.
As one of the most promising markets in South America for sure Brazil is in the focus of the glass industry and its machinery manufacturers.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
If further proof was needed of the thermal insulation and physical qualities of Wicona’s aluminium windows and doors, this is it.
AAMA to Take Further Action on Disapproved Proposals at Summer ConferenceSeveral of AAMA's proposed changes to the 2015 International Building Code (IBC) were reviewed and approved by the International Code Council (ICC) during the code…
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
Recently, the Bengbu Glass Industry Design and Research Institute Holdings subsidiary, Chengdu Optoelectronics Technology Co., Ltd. production of the first ultra-thin 0.5mm the arsenic TFT-LCD glass substrate products passed the domestic core users…
May 16 - 19, 2012At Glass South America 2012 Bystronic glass will inform about its innovative system solutions for modern glass processing and shows equipment for glass handling.
Advanced solar control glass for Single Glazing ApplicationSGG Evo is a solar control glass that is energy efficient and has thermal insulation properties in a single glazing application.
The event runs from 09:00 on 17th May 2012 until 18:00 on 18th May 2012The International Institute of Research in Glass (IIRG) presents the second International Symposium in Architectural Glass, focusing on ‘Working with light as a means of…
SCHOTT supplies restoration glass for the Palace of Tears in BerlinMainz, May 02, 2012 – Special glass from SCHOTT gives the Palace of Tears at the Friedrichstraße train station in Berlin that is listed as a historic building a glass façade that…
Window and door manufacturers and dealers come together during this event to learn best practices. improveit! 360; the nation’s leading business management application that helps remodelers, contractors and home service pros organize and grow their…
The renowned window manufacturer Internorm uses Lisec Systems to increase its already extensive manufacturing capabilities.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
Schaumburg, Ill. -- The American Architectural Manufacturers Association (AAMA), as a partner of the Window Safety Task Force, encourages everyone to recognize the importance of practicing window safety by designating one week each spring to…
The national Window and Door Manufacturers Association (WDMA) announced Mike Salsieder, president and general counsel of Kolbe & Kolbe Millwork Company, Inc. , has been elected as Vice Chairman of the Window Division and will continue to serve…
The Lead Exposure Reduction Amendments Act of 2012 (S2148), introduced by Sen. James Inhofe (R-OK), seeks to restore the "Opt-Out" provision removed from the Environmental Protection Agency's (EPA) Lead Renovate, Repair and Painting (…
BLOOMINGTON, MN (March 9, 2012) – Harmon, Inc., one of the largest U.S. commercial glaziers, today announced it is expanding into the Texas market with a new office in Dallas and a satellite facility in Austin.
At the industry's main events, both attendees and exhibitors have the opportunity to learn about the hottest trends, see the latest products and technology, make important contacts, and show their support to the glass and glazing industry.
Walker, Mich. – Helping protect low- and mid-rise buildings in need of storm hazard mitigation, Tubelite’s Force Front Storm monumental entry door systems have received Florida Product Approval (#14563).
AAMA announces 2012 schedule of events; Residential Green Certification nears completion at Annual ConferenceSchaumburg, Ill. -- American Architectural Manufacturers Association (AAMA) will host its 75th Annual Conference for fenestration industry…
Futurex Sri Lanka Internation Glass Expo 2012 will be Srilanka largest platform for the Glass Industry.
A Polish producer of windscreens for the automotive aftermarket sector is entering the North American market.
Architects use glass block solar wall tubes with phenomenal thermal performance from Quality Glass Block and Window Company.