Member Discussion Forum

Hello,

Please anyone that has any information(or knowledge)
in the base of polymeric glass (plastic-glass) application in the automotive industry, introduce me.
Thanks for your help.

Best regards!

Does anyone know if the Dutch norm for safety glass (NEN 3569) is equal or compliant with ANSI Z97?

Thanks,

Kurt

I need glass thick more then 40mm.
Does someone knows which company produces single layer flat thick glass?
Seems that the maximum thickness is 20mm, but for my necessity it is not sufficient.

Thanks

Roberto

can anyone give me info on the low e argon filled units and why they go bad?my house is six years old and 11 out of 18 windows are bad and one even blew up. i was told about this problem by the glass store but i need more info on it.the company that makes them is saying they have never heard of this problem and that it is my fault.all the windows that r bad get full sunlight all the time and the good ones only get shade .so any info on the problem would be a big help thank you all

I am currently investigating a fire which involved a glass table top. There was a candle and some other combustible items on the table. At what temperature would the glass top fail? I am thinking the combustible items ignited and the table top failed allowing ignition of the wooden table beneath the glass. Any info?

Cary

I have a large modern home in Toronto, Canada. The back of my house faces south and is 90 % windows. ( 10' by 10' windows). On sunny days the solar heat transfer is excessive. Current windows are low e. I have installed 3M film, but not much help. In fact, now that solar film is installed, I am experincing window cracking. Is there an engineered window system that will block most of the solar energy ? I prefer to stay away from mirrowed windows.

Hello,

Are there any books on the basics of glass container manufacturing and quality parameters

My windshield one cold day out of the blue cracked. From the bottom up about 5 inches and then across the window. I claimed it was defective glass that the dealer should replace under warranty. But they used this "ball point pen" test. They run a ball point pen along the crack and if they feel any chips then they say that the window was damaged by an object hitting the window.

Please, I need info about European manufacturers or salers of glass crusher machines. Indeed, we need a small glass crusher for our firm. If anybody knows any contact addresse, I'll be grateful.
Zeljko Petrovic zpetrovic@hemofarm.co.yu

You now have an alternative material to replace your Monofrax M lip blocks.