Others also read
The BFRC’s recently revised chart of approved spacer bar conductivity values has awarded Thermobar Warm Edge Spacer Tube with an even lower value of 0.16W/mK¹ with or without its gas barrier tape.
Thermobar, the UK’s Highest Performance Spacer Tube is to be showcased at Glass Build America in Las Vegas between 12 – 14 September 2012 by manufacturer and leading UK component supplier, Thermoseal Group.
With the rising demand for narrower spacer tubes for triple glazed units, leading UK Component Supplier Thermoseal Group has introduced two new sizes to its Thermobar warm edge spacer range - 7.5mm and 9.5mm.
The Glass and Glazing Federation (GGF) has signed for the FIT Show 2013 with plans to use the show to promote the GGF and its group of subsidiary companies.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
Perma Led adhesive Lead strip, having been manufactured for over 30 years has now been rebranded to fit in with Thermoseal Group’s own-manufactured product range.
The Glass and Glazing Federation (GGF) is holding the GGF Forum on April 20th in Birmingham promises to be the industry event of 2012.
NEW Thermobar warm edge spacer tube has been an unprecedented success. With production levels up to full capacity within three months of its launch into the UK market, its innovators, Thermoseal Group have now purchased additional machinery to…
In response to customer demand, New Irish Oak Georgian bar and bespoke cruciform fittings have been developed by Thermoseal Group in popular sizes 18x8mm and 25x8mm.
The Combi-Cross Georgian Cruciform from Thermoseal Group is the cost-effective solution to meeting an array of bi-colour and single-colour Georgian requirements, and allows sealed unit manufacturers to keep stock of Cruciforms to a minimum.
Introducing Rohit Kale - a Materials Specialist working with Thermoseal Group in conjunction with a UK university to develop the Group’s thermally efficient product range.
In response to customer demand, New Irish Oak Georgian bar and bespoke cruciform fittings have been developed by Thermoseal Group in popular sizes 18x8mm and 25x8mm.
They warn members, companies and consumers not to be persuaded into committing to any bogus schemes, websites, conferences or agreements until all the facts are revealed by the Government in 2012.
The Glass and Glazing Federation (GGF) has released its Annual Report for 2010 showing a stable financial position against the current uncertainty in the UK and world economy.
UK leading double glazing components supplier and warm edge manufacturer, Thermoseal Group has recently taken on a Financial Controller Matt Hambley to substantiate its continued growth.
Debut Glass in Kent is one of many of Thermoseal Group’s long-term customers now supplying all of its warm edge units with Thermobar Warm Edge Spacer to meet the market demand for ‘C’ to ‘A’ rated windows.
Insulated glass (IG) manufacturers can now purchase aluminium, steel or Thermobar warm edge spacer bar with pre-applied PIB (Polyisobutylene) primary seal from the UK’s leading supplier of IG components, Thermoseal Group.
Previously, bespoke coloured Woodgrain Georgian bar had to be mitre-cut to achieve a high quality and uniform Georgian intersection.
Glass and Glazing Federation (GGF) guidelines state that spacer bar can be exchanged within the scope of a registered Window Energy Rating (WER) providing it is deemed as a ‘same’ or a ‘better’ performing product.
Leading warm edge supplier Swisspacer enjoyed another successful show at Glasstec. Swisspacer’s stand had a constant stream of visitors who saw first hand the benefits of its top performing warm edge spacer bar.
Thermoseal Group, the UK’s leading supplier of double glazing sealed unit components and sealed unit manufacturing machinery, is exhibiting its new Thermobar Warm Edge Spacer bar at the G10 exhibition, Wembley Stadium 1–2 December 2010.
Edgetech’s press release Edgetech: A Popular Misconception (Glass on Web, 0ctober 14 2010), is extremely misleading and contains false information and spin on Swisspacer and its products.
In honour of the imminent launch of Thermobar Warm Edge Spacer, Thermoseal Group has produced a comprehensive flash presentation including its guide to achieving Window Energy Ratings (WER).