Others also read
The very latest in thermally efficient windows and doors were stipulated for a new, modern block of apartments located in a leafy Cambridgeshire suburb.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
In recent years Georgian style windows have become increasingly popular with both planners and homeowners alike.
Successful new product line for the North American Marketplace A+W Software for GlasWith their completely new product generation, A+W, the ‘youngest’ member of Friedman Operating Group, offer a wealth of state-of-the-art features for the use in…
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
One of the latest frameXpress composite door installations demonstrates the company’s versatility and breadth of choice within this market sector.
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
Meshtec partner C.R. Laurence will display the unique and innovative Guarda / Meshtec range of Premium Security Screens, Doors and Windows at GlassBuild America expo, September 10 - 12, Atlanta, Georgia.
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
With a focus on customer needs and reaching out further towards bigger target audiences, frameXpress recently linked up with Flight Timber Products Ltd at the Home Renovation Show in Birmingham at the NEC.
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
Cantifix was recently invited to install the Pilkington glass façade of The Quiet House – a concept house that will be exhibited at the Ideal Home Show.
The latest frameXpress project incorporated 6 specially designed casement windows with matching composite door and a thermally efficient glass roof, for a high specification orangery installation in Essex.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
frameXpress was recently commissioned to supply all pvcu windows, doors and roofing for a stunning orangery project in Kent.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
The difficult economic conditions have had a dramatic effect across the industry this year, however for Cutting Edge, with its strong business ethics and modern production facilities, the company is maintaining a strong and steady position as we…
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
The new interactive Cutting Edge website has been designed purely to benefit customers, providing them with substantial business support.
The latest commercial project for frameXpress is further strengthening the company’s corporate position within the sector.