Others also read
The Commission adopted on 18 October 2011 a recommendation on the definition of Nanomaterial (2011/696/EU) meant to be used as a reference for determining whether a material should be considered to be a ‘nanomaterial’ for legislative and policy…
The Western Region of the American Architectural Manufacturers Association (AAMA) will host its Spring Summit, April 30-May 1, at the Tempe Mission Palms Hotel in Tempe, Ariz.
A new residential building is rising at the upper end of New York's skyline. Located on the corner of 56th Park Avenues, this slender building, which almost looks fragile, will be 420 meters high (approx. 1,377 feet).
The American Architectural Manufacturers Association (AAMA) recently released education courses on hardware, weatherstrip and weatherseals, as well as sealants and adhesives used during factory fabrication, as part of the association’s…
The American Architectural Manufacturers Association (AAMA) announced the launch of its Facebook page for the AAMA Scholarship Program and Partner Program.
Mike Salsieder, president and general counsel of Kolbe & Kolbe Millwork Company, Inc., was elected by the Window and Door Manufacturers Association (WDMA) board of directors to serve a the national association’s 2013-14 chair.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
Cantifix was recently invited to install the Pilkington glass façade of The Quiet House – a concept house that will be exhibited at the Ideal Home Show.
Investment in the future will enable continuous manufacturing of high-quality decorative glass products - Following several months of construction work, SCHOTT is now ready to start firing up its new melting tank for manufacturing high-quality…
The latest frameXpress project incorporated 6 specially designed casement windows with matching composite door and a thermally efficient glass roof, for a high specification orangery installation in Essex.
AAMA reports plans for certification extension; celebrates Gold Label 50th anniversary at Conference
At AAMA’s 76th Annual Conference in Tucson, Ariz,, the American Architectural Manufacturers Association (AAMA) announced the intent to update an interim procedural guide that will provide a documented, optional process to extend current, unexpired…
Twelve members of the American Architectural Manufacturing Association (AAMA) sponsored 340 World Vision SchoolTools backpacks, at a total cost of $7,480, to benefit at-risk children in Navajo Nation.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
ZC&R Coatings for Optics (ZC&R), an Abrisa Technologies company is pleased to announce the publication of their new High Performance Thin Film Optical Coatings Technical Capabilities brochure.
Mark Bristow talks to Michael Gannon Editor of Glass and Glazing Products magazine, as Michael put's Mark "In The Hot Seat" to discuss his views on the industry.
With Beneq’s acquisition of the thin film electroluminescent (TFEL) business from US Planar Systems, Inc., the factory located in Olarinluoma, Finland, has become the largest in the world for atomic layer deposition (ALD) enabled products.
frameXpress was recently commissioned to supply all pvcu windows, doors and roofing for a stunning orangery project in Kent.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
Guardian Plus is a business support programme designed for businesses buying or using Guardian products either supplied by Guardian or through Guardian customers.
The CRL GRS Monolithic Tempered Glass Railing System is Now ICC-ES® CertifiedLOS ANGELES, CA — January 3, 2013 — C.R.
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
MOPS, November 19; Adam Hwang, DIGITIMES [Monday 19 November 2012]G-Tech Optoelectronics, a Taiwan-based glass processing service provider, is expanding its monthly production capacity for cover glass from 1.8 million to 2.5 million units, and that…
The difficult economic conditions have had a dramatic effect across the industry this year, however for Cutting Edge, with its strong business ethics and modern production facilities, the company is maintaining a strong and steady position as we…
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.