AAMA to Host Webinar on Glazing System Performance During Hurricane Irma

Chris Matthews
Photo source
Chris Matthews | Photo: aamanet.org
During this already active hurricane season, the American Architectural Manufacturers Association (AAMA) will host a webinar about lessons learned from 2017’s Hurricane Irma, which primarily impacted Florida.

AAMA will host Chris Matthews, Vice President and Senior Consultant of GCI Consultants, as he speaks about glazing system performance during Hurricane Irma. Observations from hundreds of inspections conducted from the Northeast to the Southeast to the Southwest of Florida will be shared. 

Register now for “Hurricane Irma | Lessons Learned,” taking place at 11:30 a.m. Eastern on Thursday, September 27. This complimentary presentation is sponsored by AAMA’s Southeast Region and is open to the public.

“The takeaways from the aftermath of Hurricane Irma are even more important now in the midst of another storm season,” said Dean Ruark, President of the AAMA Southeast Region and Director of Product Management at PGT Innovations. “We are committed to getting the latest possible information out to our membership about how to best prepare in the future.”

“AAMA knows hurricane preparedness is a critical issue to those in the industry,” said Janice Yglesias, AAMA Executive Vice President. “Our webinar seeks to share important information from Chris about what was learned in Florida in the aftermath of Hurricane Irma.”

 

About the Speaker

Matthews is Vice President and a Senior Consultant, employed with GCI Consultants since 2002. He has more than 25 years of experience working with exterior glazing and wall systems and specializes in the installation and water resistance of these systems. He has consulted with owners, architects, engineers, insurers and builders on hundreds of projects throughout North America and the Caribbean and serves as an expert witness in related matters.

He has worked extensively in the construction of new projects and the investigation and correction of existing structures with performance problems. Matthews is a graduate of the University of Florida, a certified Exterior Insulation and Finish System (EIFS) inspector, a Certified Building Commissioning Professional and a member of various industry organizations. He has published articles in several trade periodicals and made many accredited presentations to other industry professionals.

 

About the Southeast Region

The Southeast Region represents AAMA members with interests in the following 10 southeast states of the U.S.: Alabama, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas and Virginia. Those affiliated with the Southeast Region through their AAMA membership are invited to join the AAMA Southeast Region LinkedIn Group.

This is a members-only resource where AAMA members affiliated with the region can quickly view and post state-by-state code updates and other Southeast-specific news all year round. Request to join – members are approved based on verification of AAMA membership and region affiliation.

More information about AAMA and its activities can be found via the AAMA website.

600450 AAMA to Host Webinar on Glazing System Performance During Hurricane Irma glassonweb.com

Others also read

Unelko offers Quality, Performance & Value with Innovative Invisible Shield® PRO 15 & REPEL® Glass Coatings!
Laminated glass with evguard® laminating film is certified and tested worldwide by various testing institutions and can therefore withstand the highest security requirements in public buildings both indoors and outdoors. 
Robert Bürkle GmbH launches a new inline process developed for the lamination of flat glass with particularly short cycle times.
EVERLAM presents EVERLAMTM COOL — its new high-performance PVB film for use in laminated glass, which provides high protection against infra-red light.
TRADITION ADVANCED – this is the title under which RATH presents its refractory expertise for the glass industry at Glasstec 2018 in Düsseldorf.
The handling of thin and ultra-thin glass between individual production steps is a real challenge.

From industry

10924 Granite Street, Suite 200
Charlotte, NC 28273
United States

10301 North Enterprise Drive
Mequon, WI 53092
United States

NEWS RELATED PRODUCTS

Diamon-Fusion International, Inc.
Diamon-Fusion International, Inc.
Diamon-Fusion International, Inc.
Trex Commercial Products
Diamon-Fusion International, Inc.
Trex Commercial Products

Add new comment