Latest news

26 results
| The National Green Building Standard (NGBS) appointed Tom Culp, Ph.D., of Birch Point Consulting LLC and NGA Energy Code Consultant, to the 2024 ICC 700 Residential Green Building Standard Consensus Committee.
| Thirsty Thursday returns October 28th with "Code Regulations for Existing Buildings" presented by Thom Zaremba.
| Popular bi-annual glass conference just one week away!
| WDMA released the 2019 WDMA National Policy Agenda which outlines important policy priorities for the window, door, and skylight industry.
| Yale Door and Window Solutions has responded to Dame Judith Hackitt’s Independent Review of Building Regulations and Fire Safety.
| The timely topic of wind and water-related codes was addressed at the American Architectural Manufacturers Association (AAMA) 2017 National Fall Conference.
| Julie Ruth, American Architectural Manufacturers Association AAMA code representative, was awarded International Code Committee (ICC) Honorary Member status at the ICC Annual Conference and Expo held in Columbus, Ohio, earlier this month.
| The 2018 editions of the I-codes are expected to publish by Fall 2017, with the exception of the International Green Construction Code (IgCC) which will not issue until the Summer of 2018.
| AAMA recognized the contributions and achievements of its members and congratulated award winners at the 80th Annual Conference Awards Banquet held Monday night in Phoenix.
| The American Architectural Manufacturers Association recently released an updated technical information report addressing the most commonly used composite thermal barrier systems.
| The Company’s Monterey™ S55 and S80 Bi-Folding Doors and Series D900 Terrace Door are Granted Approval, Signifying Their Compliance with Florida Building Codes.
| The Welsh Government is currently consulting on new proposals to update its Building Regulations in several areas related to sustainability.
| StekloSouz of Russian proposals were sent to the Government of the Russian Federation D. Medvedev on the application of the glass industry products.
| In this article, Jon Palethorpe, Commercial Director at architectural aluminium systems specialist, Technal, looks at current trends in fenestration design and specification, and some of the latest technical advancements engineered for high…
| Experts spoke about Life Cycle Assessments and the intricacies that go into them at the American Architectural Manufacturers Association (AAMA) 78th Annual Conference held February 15-18 in Ft.
| The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
| The National Fenestration Rating Council (NFRC) has created a new website dedicated to making it easier for building code officials to meet compliance on commercial fenestration projects.
| Washington, DC --- June 11, 2012 – The International Window Film Association (IWFA), a nonprofit group, announced a landmark vote by the California Energy Commission placing Window Film, a polymer material offering energy efficiency advantages, into…
| AAMA to Take Further Action on Disapproved Proposals at Summer ConferenceSeveral of AAMA's proposed changes to the 2015 International Building Code (IBC) were reviewed and approved by the International Code Council (ICC) during the code…
| Action is needed on glass balconies, says a report from the City of Toronto’s planning and growth management committee.