Solutia's booth features the award-winning Saflex® S series advanced solar absorbing polyvinyl butyral (PVB) interlayers, Saflex® Q series advanced acoustic PVB interlayers and XIR® reflective film products.Visitors will be able to participate in several "hands-on" demonstrations, including a solar heat reduction demonstration showcasing the benefits of Saflex S series advanced solar absorbing interlayers and the company's newly acquired XIR reflective films. In addition, participants will able to "hear the difference" that Saflex Q series advanced acoustic interlayers make in automotive glazing applications through a new demonstration constructed exclusively for the JSAE event. (Logo: http://photos.prnewswire.com/prnh/20081029/AQW096LOGO)
"The annual JSAE event is a key platform for Solutia to communicate to Japanese OEMs the critical benefits that Saflex and XIR advanced interlayer technologies bring to vehicle glazing," said Daisuke Koyama, regional commercial manager, Japan & Korea, for Solutia's Advanced Interlayers division. "XIR reflective films and Saflex advanced solar and acoustic interlayers address challenges across multiple disciplines, from electric vehicle range and efficiency to noise vibration and harshness (NVH) reduction and passenger comfort."
"Saflex advanced solar interlayer and XIR reflective film help create a more comfortable cabin environment for passengers by reducing the rate at which the sun heats up a vehicle," said Danny Hu, Saflex automotive market manager for the Asia Pacific region. "When a vehicle starts off cooler or gains less heat while driving, the air conditioning (A/C) system uses less power to achieve and maintain a desired cabin temperature. This allows automotive designers to use smaller and lighter A/C systems, which also allows electric vehicles the ability to increase the driving range for each charge."
Comfort and weight savings may also be achieved with the use of Saflex Q series advanced acoustic interlayers in automotive glazing applications. Wind and road noise transmitted through car windows are a major source of a vehicle's interior noise, can diminish driver satisfaction with ubiquitous audio and hands-free systems and may increase driver fatigue. Using laminated glass made with an advanced Saflex Q series acoustic interlayer, designers can reduce interior noise without increasing the windscreen weight. Switching from an ordinary windscreen to one made with Saflex advanced acoustical interlayer immediately reduces wind and road noise by up to three decibels.
Automotive laminated glass incorporating XIR film, Saflex S series and Saflex Q series technologies are drop-in interlayer solutions that can provide improved cabin comfort, fuel efficiency and CO2 emission reductions on most internal combustion (ICE) vehicles. Solutia's automotive glazing interlayer products can be used in the windscreen, sunroof, back lites and side laminate applications. For additional product information, including product brochures, technical data, product offering and samples, please visit www.saflex.com .
Notes to Editor: SOLUTIA and the Radiance Logo™ and all other trademarks listed below are trademarks of Solutia Inc. and/or its affiliates.
Forward Looking Statements
This press release may contain forward-looking statements, which can be identified by the use of words such as "believes," "expects," "may," "will," "intends," "plans," "estimates" or "anticipates," or other comparable terminology, or by discussions of strategy, plans or intentions. These statements are based on management's current expectations and assumptions about the industries in which Solutia operates. Forward-looking statements are not guarantees of future performance and are subject to significant risks and uncertainties that may cause actual results or achievements to be materially different from the future results or achievements expressed or implied by the forward-looking statements. These risks and uncertainties include, but are not limited to, those risk and uncertainties described in Solutia's most recent Annual Report on Form 10-K, including under "Cautionary Statement About Forward Looking Statements" and "Risk Factors", and Solutia's quarterly reports on Form 10-Q. These reports can be accessed through the "Investors" section of Solutia's website at www.solutia.com. Solutia disclaims any intent or obligation to update or revise any forward-looking statements in response to new information, unforeseen events, changed circumstances or any other occurrence.
Solutia is a market-leading performance materials and specialty chemicals company. The company focuses on providing solutions for a better life through a range of products, including: Saflex® polyvinyl butyral interlayers for glass lamination and for photovoltaic module encapsulation and VISTASOLAR® ethylene vinyl acetate films for photovoltaic module encapsulation; LLumar®, Vista™, EnerLogic®, FormulaOne®, Gila®, V-KOOL®, Huper Optik®, IQue™, Sun-X™ and Nanolux™ aftermarket performance films for automotive and architectural applications; XIR® and Heat Mirror® performance films that are incorporated into aftermarket window films, laminated glass products and suspended insulated glass units for use in automotive and architectural applications. Flexvue™ advanced film component solutions for solar and electronic technologies; and technical specialties products including Crystex® insoluble sulfur, Santoflex® PPD antidegradants, Therminol® heat transfer fluids and Skydrol® aviation hydraulic fluids. Solutia's businesses are world leaders in each of their market segments. With its headquarters in St. Louis, Missouri, USA, the company operates globally with approximately 3,400 employees in more than 50 worldwide locations. More information is available at www.Solutia.com .