Others also read
GlassCon Global is the first event of its kind in North America, which brings together global innovations in glass technology to further the development of the glass industry.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Members of AAMA’s Glass Material Council (GMC) Marketing Committee and Insulating Glass Manufacturers Alliance's (IGMA) Visual Quality Task Group are developing a consumer guide for homeowners which will explain allowable glass obstructions…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Mary Olivier, Steve Green, Terry Robinholt, Tom Minnon, Tim Doughty, Scott Dooley and Walt Lutzke from various Tubelite Inc. locations were in attendance at this year’s event sponsored by the National Glass Association.
With excellent attendance of more than 6.200 attendees and an industry focused on growth, GlassBuild America 2013 was a huge success.
The show floor opened today at GlassBuild America 2013 to 6,000 registered attendees and exhibitors. Over 350 exhibitors welcomed the attendees and were eager to make new business contacts and visit with longtime business associates.
Where windows and energy efficiency come together. Stop by and talk to the experts about meeting new energy efficiency requirements with proven choices for your specific needs. New regulations and customer demand to save energy are bringing…
Now in its 11th year, GlassBuild America is the gathering place for the entire glass, window and door industries in North America.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
Mark Silverberg, president of Technoform North America, Inc., will present at upcoming glazing industry events for the National Glass Association (NGA) and Glass Association of North America (GANA).
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
GlassBuild America: The Glass, Window, & Door Expo is pleased to announce continued growth in the Innovative Product Promotion program featured once again at the 2013 trade show.
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
North America’s largest glass, window and door show listed No. 184 - GlassBuild America: The Glass, Window & Door Expo® was listed by Tarsus Group’s Trade Show News Network (TSNN)’s Top 250 Trade Shows in the United States in 2012.
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
Attendees and exhibitors can now make housing reservations for GlassBuild America 2013: The Glass, Window & Door Expo set to take place September 10-12, 2013 at the Georgia World Congress Center in Atlanta, Georgia. “We are very excited…
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
VIENNA, VA (December 20, 2012) — The National Glass Association announces the launch of a newly enhanced MyGlassClass online learning portal.
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.