For.El. S.P.A.: The Hot Melt Automatic Sealing Machine

Date: 11 December 2003
Source: For.El. S.p.a.

Date: 11 December 2003

Launched during GP&T 2003 exhibition, the Hot Melt Automatic Sealing Machine Art.SAHM20-SAHM25-SAHM30 has exceeded all expectation, as a result of in-depth studies carried out by For.

El’s R&D Department, this machine - like all of For.El’s range of products – guarantees incredible performance with superior build quality.Is an automatic machine that carries out the perimeter sealing of double glazed or triple glazed units (optional) with hot-melt sealant.
As the coupled unit exits the Coupling Press, a bespoke measuring sensor located on the in feed conveyor of the Hot Melt Sealing Robot, detects and geometrically measures its dimensions. With this information, combined with the continuous measurement of the perimeter depth, allows the onboard PLC to control the quantity and flow rate of the material.
The Hot Melt Sealing Robot carries out the perimeter sealing via the For.El. Art. HM1200 Hot Melt Extrusion Pump which pumps hot melt directly to the application head.
With proven technology and innovative design, the Hot Melt Sealing Robot extrudes hot melt through a balanced extrusion system that spreads the sealant consistently along the whole perimeter cavity.
The hot melt sealant temperature is regulated and monitored by PT100 probes and PID thermo-regulators strategically placed throughout the extrusion device and they keep it around 180÷190°C. A digital programmer gives the ability to pre-heat the hot melt in advance of normal production on a weekly basis.
A special heated spatula corner dresses the hot melt, after which, the finished sealed unit is conveyed onto the exit conveyor. The operator can then offload the sealed unit by hand or using one of the For.El. Range of lifting manipulators Art. 810, 810H and 820.
The SAHM20, SAHM25 and SAHM32 can seal units of up to 2000, 2500 and 3200 mm high respectively.
The above features make the Automatic Sealing Robot a state-of-the-art machine, ensuring efficient and reliable use delivering an exceptionally high quality product.
At For.El’s R&D Department new ideas and updates are part of a daily routine and as a result we are already developing innovative new projects: THE EVOLUTION CONTINUES ( www.forelspa.com).

600450 For.El. S.P.A.: The Hot Melt Automatic Sealing Machine glassonweb.com

See more news about:

Others also read

Local quality glass producer Emirates Glass Limited has won contracts to supply 68,000 square metres of its high quality EmiCool glass to five major projects in Dubai.
Southwall Technologies Inc. (Nasdaq:SWTX), a global developer, manufacturer and marketer of thin-film coatings for the electronic display, automotive glass and architectural markets, today announced that on Dec. 18, 2003, it secured an agreement for a new bank loan guarantee and equity financing package of up to $7.5 million from Needham & Company, Inc., its affiliates and Dolphin Asset Management.
When did the wine industry start using glass bottles, and how did they settle on their current size of 750ml? For the answer to these questions, you have to go back in time - back thousands of years to when wine was first cultivated and enjoyed.
Praxair, Inc. (NYSE: PX) today announced that its subsidiary Praxair Canada Inc.'s specialty gases plant in Paris, Ontario, Canada, is one of Praxair's first specialty gases plants in North America to complete the upgrade to ISO 9001:2000, the latest ISO 9000 standard for quality.
KUB Malaysia Bhd has accepted an offer from Nippon Sheet Glass Co Ltd (NSG) to acquire its 15% stake in Malaysian Sheet Glass Bhd (MSG) for RM32.6 million in cash, or RM2.68 per share.
Co-Ventures in Glass Containers (CVIGC, Ltd.) of Tampa, Florida, USA and Micro-Tek Canada, Inc. Of Toronto, Canada are excited to announce the beginning of a long term joint venture to combine their extensive experiences and resources to offer the Glass Container Industry globally a best value alternative for all their outsourcing needs in manufacturing, operations and technical assistance agreements, specifically targeted to the smaller manufacturers who have found the larger service companies to be cost and profit prohibitive.The principals of the two companies have found a global need for smaller glass companies who require excellent technical resources to properly compete within the industry without the high costs of employing their own staffs or outsourcing their requirements to the larger service companies whose own operating costs and overhead are substantial.

Add new comment