Agr Thickness 360 TM gauge expands measurement capabilities of the OmniLab

Documentation of glass thickness distribution on production samples is an integral part of glass container process management and quality assurance programs.

Acquiring and documenting comprehensive distribution measurements with laboratory accuracy can be a challenging if not tedious process.

Agr International has met this challenge by incorporating an all new thickness measurement station within the Agr OmniLab® automated testing and measurement system. Labeled the “Thickness 360™ gauge,” it performs thickness measurement at the same time that other critical measurements are performed on a sampling set-out. With this new option, measurements including thickness, weight, dimensional measurement, pushup, ID/bore and pressure (for pressure ware) are performed by a single system, with results automatically recorded in a single report with mold correlation.

According to Robert Cowden, Agr’s Chief Operating Officer, “The Thickness 360 measurement gauge offers glass bottle producers a new level of thickness measurement capability for the testing laboratory or near-the-line applications that, until now, was not possible with conventional means. In addition to high accuracy thickness measurement, every bottle is handled and measured exactly the same way. This ensures that every bottle is measured in exactly the same locations, greatly improving measurement consistency, repeatability and accuracy.”

The Thickness 360 gauge incorporates non-contact vision-guided confocal technology with 3-axis sensor positioning for thickness measurement. This unique design utilizes the visual scan data gathered by the Omnilab’s Dimensional Sampling Gauge (DSG) imaging and measurement station to map and direct the thickness sensor to the article, ensuring optimal sensor positioning. With this approach, the bottle orientation and shape is fully understood making it possible to achieve optimal accuracy, even on curves, corners and difficult-to-measure regions such as tapered sidewall and label panels.

In addition to traditional round ware, the design of the Thickness 360 gauge is particularly suited for non-rounds such as flasks, liquors, square and rectangular bottles as well as special-use containers. Of particular significance is the ability of this system to handle difficult-to-measure regions of a bottle such as steep inclined shoulders and corner regions on rectangular containers.

Data from the Thickness 360 gauge is presented in graphic and numerical formats. During the measurement cycle, thickness data is displayed in linear and cross sectional plots. These plots give operators a visual representation of the material distribution that is easily understood. In addition to the graphic display, numerical data is documented for each bottle. Thickness data is automatically captured and mold-correlated with all other critical measurements performed.

The Thickness 360 gauge is available as an option on all new OmniLab and Dimensional Sampling Gauge products shipping in 2013 from Agr. A version is also available as a retrofit package for existing systems.

About the OmniLab system

The OmniLab system is Agr’s automated sampling, measurement and testing station for use on the glass production line, or as a stand-alone system. It incorporates two powerful Agr sampling devices, the Dimensional Sampling Gauge and the Sampling Pressure Tester, into one totally integrated testing station that is designed to work unattended to perform a host of quality management functions. Since its introduction a few years ago, a number of innovative glass container manufacturers have implemented the DSG or OmniLab in their operations including Verallia, Amcor, Owens-Illinois, Vetropack, Sisecam, AB Imbev, Parkcam, Inbev and Anchor, to name a few.

The Thickness 360 gauge and OmniLab system are part of Agr’s broad line of laboratory testing and quality control devices for the glass container and filling industry. Agr headquarters and main manufacturing facility is located in Butler, PA, USA.

For further information contact: David Dineff, Product Marketing Director, Agr International, Inc., Butler, PA, USA. Phone +1 (724) 482-2163 or email ddineff@agrintl.com.

600450 Agr Thickness 360 TM gauge expands measurement capabilities of the OmniLab glassonweb.com

Others also read

Şişecam Flat Glass Introduced its Solar Energy Glasses at Intersolar
As the leader of the plate glass market in Turkey, and the largest manufacturer in Europe, Şişecam Flat Glass took its place at Intersolar with its cutting-edge products.
Şişecam Flat Glass participated in the 2nd Advanced Materials in Construction Summit
Keeping energy efficiency in the forefront Şişecam Flat Glass participated in the 2nd Advanced Materials in Construction Summit held in Berlin with its state-of-the-art products.
Şişecam Group strengthens its position in India
Şişecam bought a further 49.8% stake in HNG Float Glass Limited, its flat glass manufacturer affiliate in India, for 85.4 million US Dollars.
Şişecam Group acquires its second flat glass manufacturing facility in Italy
One of the global players of the glass industry, Şişecam Group has completed its acquisition process of Sangalli Vetro Manfredonia facility.
Prof. Ahmet Kırman
Şişecam Group reported consolidated net sales of TL 3.1 billion and a net profit of TL 569 million in the first quarter ended March 31, 2018. The Group's consolidated EBITDA reached TL 907 million for the same period.

From industry

Is Kuleleri, Kule: 2, Kat: 22, 4. Levent
34330 Levent-Istanbul/İstanbul
Turkey

NEWS RELATED PRODUCTS

Add new comment