Sodium silicate


How to improve furnace efficiency in sodium silicate furnace?

Abdelhalim LAOUIR
Thu, 15/07/2010 - 15:50

I think I can help you, but in French language

Guest User
Wed, 28/07/2010 - 01:13

Maybe we can.

Guest User
Tue, 03/08/2010 - 06:34

The optimal preparation conditions of BCSCP were obtained through orthogonal tests. The influence of hydraulic retention time (HRT) and air–liquid ratio (A/L) on the removal of chemical oxygen demand (COD) and ammonia nitrogen (NH3–N) were investigated. Under the selected operating parameters, the average removal efficiencies of COD and NH3–N in the BCSCP reactor had slightly better performance compared with the CCP reactor throughout the filter media. Scanning electron microscopy (SEM) analysis indicated that BCSCP had higher porosity and larger total surface area in comparison to the CCP, and the microorganisms on BCSCP were more abundant than those on CCP. Therefore, BCSCP is a potential material for use as the filter media of BAF for wastewater treatment. BCSCP application, as a novel process of treating wastes with waste, provides a promising way to use blast furnace dust (BFD).

[url=]Market Tips[/url]

[url=]Free Nifty Tips[/url]

[url=]Mcx Tips Free Trial[/url]

Guest User
Wed, 15/12/2010 - 10:18

How to install pave, which Zr fused cast side wall not flat and some cullet there? cause we are using second Zr fused cast, how is with the expansion?

I have read and I agree to's Terms of Use, including Privacy Policy and Cookie Use.