Others also read
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Glazing Vision would like to congratulate our own Gary Hearn, Gary, Glazing Vision’s Quality Manager, has passed the examination requirement set by IRCA (International Register of Certificated Auditors), a division of the Chartered Quality Institute.
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
At Glasstech Asia 2013 you will get an overview about Bystronic glass’ latest machinery for the manufacturing of insulating glass and laminated glass, handling equipment and for the pre-processing of automotive glass.
All exhibition stands at the Glassman America 2013 show on 11th - 12th September in Las Vegas, USA have sold out! Exhibition organiser Quartz Business Media said all 71 stands have now been sold, almost two months before the event is due to…
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
Demonstrating its ongoing support for the American Institute of Architects (AIA), Kolbe proudly sponsors the Custom Residential Architects Network (CRAN) and the Historic Resources Committee (HRC).
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
Larry Richert has been named continuous improvement manager for Tubelite Inc., serving both facilities in Reed City and Walker, Mich.
Tubelite Inc. has named Steve Mikkelson to the newly created position of quality manager. He works closely with Tubelite's production and executive management teams."Tubelite strives to provide the highest level of quality in our…
The event runs from 09:00 on 17th May 2012 until 18:00 on 18th May 2012The International Institute of Research in Glass (IIRG) presents the second International Symposium in Architectural Glass, focusing on ‘Working with light as a means of…
At the industry's main events, both attendees and exhibitors have the opportunity to learn about the hottest trends, see the latest products and technology, make important contacts, and show their support to the glass and glazing industry.
AAMA announces 2012 schedule of events; Residential Green Certification nears completion at Annual ConferenceSchaumburg, Ill. -- American Architectural Manufacturers Association (AAMA) will host its 75th Annual Conference for fenestration industry…
Futurex Sri Lanka Internation Glass Expo 2012 will be Srilanka largest platform for the Glass Industry.
Schaumburg, Ill. -- The 2011 edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS "North American Fenestration Standard/Specification for windows, doors, and skylights" (NAFS-11) has received final approval and is now available.