Others also read
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Confirmations and new responsibilities at the top management of Gimav during the general meeting held Monday June 16, 2014.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…
William Freeman, technical consultant to the Resilient Floor Covering Institute (RFCI), discussed the institute’s alternative to Health Product Declarations (HPDs), during the American Architectural Manufacturers Association (AAMA) Summer Conference…
Now available for download for Apple and Android devices - In conjunction with its Summer Conference, June 1-4, 2014, the American Architectural Manufacturers Association (AAMA) has released the AAMA app .
* News Release * - Registration for AAMA Summer Conference now open; Keynote speaker to address the future of ADA Schaumburg, Ill. -- Registration is now open for the American Architectural Manufacturers Association (AAMA) Summer Conference, to be…
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
Following the success of Carl F Groupco’s display at the inaugural FIT Show, the 2014 event will be the launch platform for a number of new products supplied by the established hardware distributor.
fensterbau/frontale, the International Trade Fair Window, Door and Facade, takes place in the Nuremberg exhibition centre from 26 - 29.
Spring 2014 offers from March 26-29 one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
March 2014 will offer one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Members of AAMA’s Glass Material Council (GMC) Marketing Committee and Insulating Glass Manufacturers Alliance's (IGMA) Visual Quality Task Group are developing a consumer guide for homeowners which will explain allowable glass obstructions…
The Aluminum Material Council (AMC) of the American Architectural Manufacturers Association (AAMA) has released a new white paper on aluminum’s sustainability, strength and efficiency entitled, "Aluminum: The Total Solution for Sustainable,…
Highly insulating fenestration technologies could reduce energy by 18 percent Karma Sawyer, technology manager and physical scientist in the Department of Energy’s Building Technologies Office’s (BTO) Emerging Technologies Program, delivered a…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Implementation date extended to January 2015; Window and skylight criteria adjusted Doug Anderson, manager of the Environmental Protection Agency’s (EPA) ENERGY STAR® program, provided insight into the rationale the EPA used in developing…