Others also read
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
Following the success of Carl F Groupco’s display at the inaugural FIT Show, the 2014 event will be the launch platform for a number of new products supplied by the established hardware distributor.
Spring 2014 offers from March 26-29 one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
March 2014 will offer one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
Wausau Window and Wall Systems adds six new educational programs to its American Institute of Architects’ Continuing Education System (AIA/CES) courses: * Accessibility Codes for Window Hardware (1 LU/HSW)* Protective Window Design (1 LU/HSW)*…
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Air infiltration savings added to energy savings for more accurate comparisons in replacement window projects.
The Aluminum Material Council (AMC) of the American Architectural Manufacturers Association (AAMA) has released a new white paper on aluminum’s sustainability, strength and efficiency entitled, "Aluminum: The Total Solution for Sustainable,…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
During GlassBuild America, Sept.10-12, the American Architectural Manufacturers Association (AAMA) hosted an interactive game show that gave attendees the opportunity to win discounts on courses and exams from the association’s FenestrationMasters(…
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The American Architectural Manufacturers Association (AAMA) has released an updated standard that establishes minimum performance requirements for self adhering flashing surrounding exterior wall fenestration products.
The American Architectural Manufacturers Association (AAMA) released education courses on curtain wall design, aluminum storefronts and entrances, as well as energy and the architectural fenestration industry, as part of the association’s…
Stephen Gold, president and CEO of Manufacturers Alliance for Productivity and Innovation (MAPI), delivered a keynote presentation on the recovery of the U.