Others also read
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Highly insulating fenestration technologies could reduce energy by 18 percent Karma Sawyer, technology manager and physical scientist in the Department of Energy’s Building Technologies Office’s (BTO) Emerging Technologies Program, delivered a…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Implementation date extended to January 2015; Window and skylight criteria adjusted Doug Anderson, manager of the Environmental Protection Agency’s (EPA) ENERGY STAR® program, provided insight into the rationale the EPA used in developing…
GPAD 2014, organized by software specialist FeneTech will be held in the JW Marriott Hotel and Conference Center in New Orleans from March 20-21, 2014.
Once every two years, the European Union awards excellence in architecture. INGLASS Warsaw 2014 has as special guest architect Ósbjørn Jacobsen, the winner of the European Union Prize for Contemporary Architecture, Mies van der Rohe Award 2013. …
The American Architectural Manufacturers Association (AAMA) National Fall Conference will be held in Baltimore, Oct. 27-30.
As Europe’s leading event for the decoration of glass, the fifth GlassPrint conference and exhibition will return to Düsseldorf, Germany on 27-28 November 2013.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The fourth edition of INGLASS International Architecture Conference will take place in Warsaw on November 27, 2013.
All exhibition stands at the Glassman America 2013 show on 11th - 12th September in Las Vegas, USA have sold out! Exhibition organiser Quartz Business Media said all 71 stands have now been sold, almost two months before the event is due to…
Stephen Gold, president and CEO of Manufacturers Alliance for Productivity and Innovation (MAPI), delivered a keynote presentation on the recovery of the U.
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
AAMA assembles 50 backpacks for Chicago children to commemorate certification anniversary. The American Architectural Manufacturers Association (AAMA) recently participated in a day of service at World Vision in Chicago to commemorate the…
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The Western Region of the American Architectural Manufacturers Association (AAMA) will host its Spring Summit, April 30-May 1, at the Tempe Mission Palms Hotel in Tempe, Ariz.
The American Architectural Manufacturers Association (AAMA) announced the launch of its Facebook page for the AAMA Scholarship Program and Partner Program.
Mike Salsieder, president and general counsel of Kolbe & Kolbe Millwork Company, Inc., was elected by the Window and Door Manufacturers Association (WDMA) board of directors to serve a the national association’s 2013-14 chair.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
Twelve members of the American Architectural Manufacturing Association (AAMA) sponsored 340 World Vision SchoolTools backpacks, at a total cost of $7,480, to benefit at-risk children in Navajo Nation.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…