Others also read
Satinal addresses poor Asian labor and safety conditions that fall below European standards
Kuraray will take part in the 228th edition of Zak World of Façades, taking place at the InterContinental Tashkent on September 24, 2026.
ECCC's Jamie Hulan outlined upcoming ENERGY STAR Canada changes and market transformation strategy at the FGIA Fall Conference.
Dr. Stephen Morse of Michigan Technological University shares first-look results on vacuum insulated glass (VIG) durability at the FGIA Fall Conference.
An environmental psychologist reported on the latest lighting research and the impact of lighting on human health during the Fenestration & Glazing Industry Alliance (FGIA) Fall Conference in Calgary, AB.
Satinal obtained EPD Declaration for both STRATO® Glass Interlayers and STRATO® Solar PV Encapsulants as great sustainble films in the industry.
ToughGlaze, a leading supplier of commercial glass in the UK for over 30 years, was the first company in the world to purchase the Sparklike Handheld NOVA™. In this customer story, they share their experience with the device.
Two years after CircuClarity One, the initiators take stock: what has really changed in the glass sector and what does it take for good ideas to make a real impact?
Registration is now open for the Fenestration and Glazing Industry Alliance (FGIA) Insulating Glass (IG) Fabricators Workshop, which will be held October 27-29 at the Intertek testing facility in Fridley, MN.
At GlassBuild America 2026, Booth #1945, Glaston is showcasing its full portfolio of automation solutions spanning tempering, lamination, insulating and mobility glass manufacturing, each built to help processors not just keep pace, but lead.
Since gas fill in an IGU is invisible to the eye, Sparklike's Handheld NOVA™ turns verification into traceable, unit-level documentation manufacturers can rely on for compliance and quality control.
On Chicago's former Finkl Steel site, high-performance Vitro glass helps turn 1229 W. Concord into a daylight-filled, riverfront-facing model for next-generation life sciences design.
The SANCO Group is continuing its expansion across Europe. With WOLF Fenster AG in South Tyrol, Italy, the alliance welcomes a long-established, highly innovative new partner.
VacuMax™ Vacuum Insulating Glass (VIG) by Vitro Architectural Glass uses two tempered lites of glass, a hermetic edge seal, a getter for long-term performance and nearly invisible micro-pillars to deliver exceptional thermal insulation in a slim,…
For the 14-story Reverb Alton Collection apartment building in Kansas City, Burns & McDonnell chose Solarban® 70 Optiblue® glass to balance daylighting, views, and thermal efficiency with the character of the historic Crossroads Art District.
In Düsseldorf international decision-makers will encounter innovations, knowledge and concrete solutions for the glass sector
Optimize gas fill verification with the right measurement mode.
An innovative photovoltaic façade project has been developed in the Netherlands, integrating high-performance glass with 5BB monocrystalline technology.
Rising 41 stories above downtown, One St. Petersburg has become a defining feature of the city's skyline and a prominent landmark along Florida's Gulf Coast.
For the third year in a row, AGMT will host glazier testing during GlassBuild America 2026 in Las Vegas, Nevada.
EnduroShield was applied to 2,200 m² of glass at the University of Ottawa Faculty of Health Sciences Building, supporting low-maintenance performance and bird-friendly design goals.
Several opportunities for hands-on industry experience and learning will be offered during the 2026 FGIA Fall Conference in Calgary, AB.
National Glass has strengthened its production capabilities with the installation of a new FOREL Vertical Edgework Machine, currently being commissioned at the company's facility.
A new roadmap explores how Germany's glass industry can achieve CO₂ neutrality by 2045, outlining the technologies and strategies needed to drive decarbonisation.
NGA calls on representatives from glass fabricators and manufacturers to participate in the PCR guidance development process